系統識別號 | U0002-2606200910152500 |
---|---|
DOI | 10.6846/TKU.2009.01413 |
論文名稱(中文) | 六硼化鑭合成與性質 |
論文名稱(英文) | Synthesis and property of lanthanum hexaboride |
第三語言論文名稱 | |
校院名稱 | 淡江大學 |
系所名稱(中文) | 機械與機電工程學系碩士班 |
系所名稱(英文) | Department of Mechanical and Electro-Mechanical Engineering |
外國學位學校名稱 | |
外國學位學院名稱 | |
外國學位研究所名稱 | |
學年度 | 97 |
學期 | 2 |
出版年 | 98 |
研究生(中文) | 蔡秉叡 |
研究生(英文) | Bing-Ray Tsai |
學號 | 696370427 |
學位類別 | 碩士 |
語言別 | 繁體中文 |
第二語言別 | |
口試日期 | 2009-06-12 |
論文頁數 | 77頁 |
口試委員 |
指導教授
-
林清彬(cblin@mail.tku.edu.tw)
委員 - 蔡有仁 委員 - 張子欽 |
關鍵字(中) |
六硼化鑭 高溫低壓合成 遮蔽係數 穿透率 |
關鍵字(英) |
Lanthanum hexaboride Low pressure sintering method Shading coefficient Transmittance |
第三語言關鍵字 | |
學科別分類 | |
中文摘要 |
本研究使用七莫耳結晶水之氯化鑭、硼氫化鈉與鎂粉末於高溫(600、800及1000℃)低壓(10-2torr)條件下成功合成出六硼化鑭顆粒,六硼化鑭的結晶程度隨合成溫度增加而上升。將合成的六硼化鑭顆粒均勻混入壓克力系感光UV膠內,且經球磨混練及粒徑微細化後製得的隔熱膠,經光譜儀分析知近紅外光遮蔽效果隨合成溫度增加及粒徑減小而增加;隔熱膠固化及接著於6mm單層玻璃基材後再濺鍍約30nm金鍍層及6mm單層玻璃基材濺鍍金鍍層後再與固化隔熱膠接著,發現前者之結構模組俱較低的遮蔽係數。3mm單層玻璃間膠合固化隔熱膠及金鍍層後,由於光在界面間的多重反射及吸收,近紅外光遮蔽效果較隔熱膠固化於6mm單層玻璃基材後再濺鍍金鍍層佳。 |
英文摘要 |
This study has successfully synthesized lanthanum hexaboride by using magnesium powder, NaBH4 and LaCl3·7H2O at high temperature (600、800、1000℃) and low pressure (10-2 torr). The crystalline degree of lanthanum hexaboride increased with raisingsynthesizing temperature. The heat-insulating resin was prepared by uniformly blending synthesized lanthanum hexaboride particulates into UV-curing acrylic resin, then thelanthanum hexaboride particulates of the mixture was ball-milled to nano-scaled meter. The spectrum analysis showed that the near-infrared shielding effect increased accordingto increased synthesizing temperature and decreased particle size. Comparing two modules of different layer sequence on the surface of the 6mm thickness-glass substrate:(1)curing heat-insulating resin before sputtering a about 30nm gold layer ;and (2)sputtering a about 30nm gold layer before coating and curing a heat-insulating resin, respectively which alower shading coefficient was obtained on the module of former structure. Thenear-infrared shielding effect of the module with laminated a cured heat-insulating resin and then sputtering a about 30nm gold layer between 3mm-thickness glasses is better than the module with cured a heat-insulating resin on the surface of the 6mm-thickness glass substrate and then sputtering a about 30nm gold layer . The positive effect is due to the multiple reflection and absorption of light between interfaces. |
第三語言摘要 | |
論文目次 |
目錄 摘要····················································Ⅰ Abstract················································Ⅱ 總目錄·························· III 圖目錄··························VⅠ 表目錄··························VⅡ 壹、導論··························1 1-1 前言················································1 1-2 文獻回顧············································4 1-2.1折射與反射於近紅外光遮蔽機制·······················4 1-2.2 吸收於近紅外光遮蔽機制····························7 1-2.3六硼化鑭··········································11 1-2.4 紫外光硬化技術···································14 1-2.5節能玻璃··········································15 1-3 研究範疇···········································18 貳、實驗設計···········································29 2-1實驗藥品器材與實驗設備······························29 2-1.1 實驗材料······················29 2-1.2 實驗設備及分析儀器·······························30 2-2 實驗程序···········································32 2-2.1合成藥品之熱重分析測試····························32 2-2.2 LaB6奈米粉末合成·································32 2-2.3 LaB6奈米粉末之淨化·······························33 2-2.4 形態觀察·········································34 2-2.5 X光能量散佈分析儀(EDS) ··························34 2-2.6 粒徑分析·········································35 2-2.7 X-Ray繞射分析····································35 2-3 性質測試···········································36 2-3.1光譜測試··········································36 2-3.2隔熱玻璃製作及隔熱性能測試························37 參、結果與討論······················36 3-1 粉末性質分析·······································45 3-1.1 LaCl3·7H2O與NaBH4脫水及熱解聚分析················45 3-1.2 LaB6 XRD與EDS分析································45 3-1.3 LaB6之顯微結構···································47 3-1.4 LaB6之奈米化·····································47 3-2 光學性質分析·······································48 3-2.1 薄膜與平板玻璃之穿透率、反射率與吸收率計算········48 3-2.2 日光輻射熱取得率··················50 3-2.3 近紅外光遮蔽膠膜光譜分析·························51 3-2.4 節能膠合玻璃性能分析·····························53 肆、結論··························70 伍、參考文獻···········································72 圖目錄 圖 1-1、不同厚度的鍍膜層在反射率上的表現[8]············20 圖1-2、3M 240層光學隔熱膜膜示意[7]·····················21 圖 1-3、菁染料結構與其吸收光譜[14]·····················22 圖1-4、多次甲基菁染料結構[15]··························22 圖1-5、錯合物之結構與其吸收光譜[21]····················23 圖 1-6、六硼化鑭之結構[22]·····························24 圖2-1、合成反應系統與反應式示意························39 圖2-2、HITACHI U-4100分光光譜儀外觀····················40 圖2-3、6mm隔熱單層玻璃功能層設計示意···················41 圖2-4、3mm膠合隔熱雙層玻璃功能層設計示意···············42 圖3-1、原料熱脫水TGA分析·······························57 圖3-2、粉末成品在各燒結溫度條件下之XRD繞射分析·········58 圖3-3、合成粉末成品之EDS分析···························59 圖3-4、ALDRICH LaB6粉末之SEM照片·······················60 圖 3-5、不同條件下製備之近紅外光遮蔽膠膜光譜分析·······65 圖 3-6、SEM照片及條件下粒徑分析························67 表目錄 表一、氧化物具有電致變色性質的之過渡金屬元素[19] ······25 表二、UV-Curing與 Heat Curing之比較[35]················26 表三、紫外光硬化材料的基本組成及其功能[36]·············26 表四、商業上常用的光起始劑與生產公司[34]···············27 表五、玻璃綠建材之評估基準表[37] ······················28 表六、功能性隔熱膠膜之製備條件·························43 表七、節能玻璃之製備條件·······························44 表八、合成粉末成品之粒徑分析···························61 表九、可見光穿透率及反射率計算之Dλ.Vλ係數[41]·········62 表十、日光穿透率、反射率及吸收率計算之Eλ.△λ係數[41]··63 表十一、熱輻射光譜分佈對應值值 [41] ···················64 表十二、室內與室外之表面轉換係數 [42] ·······································64 表十三、各條件隔熱膠膜之可見光與日光(熱)穿透率分析··············66 表十四、各條件隔熱膠膜之粒徑分析················································66 表十五、各條件下節能膠合玻璃之光學性質量測分析結果···········68 表十六、各條件下節能膠合玻璃之遮蔽係數····································69 |
參考文獻 |
1. D. A. Skoog, J. J. Leary ,” Principles of Instrumental Analysis 5th ed.”, Saunders College Publishing, (1992) pp.253-283. 2. 職業安全健康局,“醫護服務業安全健康通訊",香港職業安全健康局,(2002) pp.1-6. 3. 陳弘裕,涂金榮,張淑君, ”建築省能對策” ,中正高工學報,Vol.3 (2003) pp.115-126. 4. Christopher B. Walsh, Elias I. Franses ,“Ultrathin PMMA films spin-coated from toluene solutions” , Thin Solid Films , Vol.429 (2003) pp.71-76. 5. Paul Lippens, Hugo Lievens ,“Requirements for sputtering magnetic alloys on organic film” , Thin Solid Films,Vol.281-282 (1996) pp.186-189. 6. S.B.Luitjens, S.E.Stupp, J.C.Lodder ,“Metal evaporated tape state of the art and prospects” , Journal of Magnetism and Magnetic Materials, Vol.155 (1996) pp.261-265. 7. 3M,“隔熱紙簡介",台灣明尼蘇達礦業製造股份有限公司,(2005) 8. 羅吉宗, ”薄膜科技與應用”,全華科技圖書股份有限公司,(2004) pp.41-43. 9. 白木靖寬,吉田貞史, ”薄膜工程學",全華科技股份有限公司,(2004) pp.4.36-4.51. 10. J.Vetter, E.Lugscheider, S.S.Guerreiro ,“(Cr:Al)N coatings deposited by the cathodic vacuum arc evaporation” , Surface and Coatings Technology, Vol.98 (1998) pp.1233-1239. 11. Xiang-hui Wang, Friedrich Prokert, Helfried Reuther, Manfred F. 72 Maitz, Feng Zhang ,“Chemical composition and biocompatibility of Ti-Ag-O films prepared by ion beam assisted deposition”, Surface & Coatings Technology , Vol.185 (2004) pp.12-17. 12. D. F. Susan, K. Barmak, A. R. Marder , “Electrodeposited Ni-Al particle composite coatings” , Thin Solid films, Vol.307 (1997) pp.133-140. 13. M. Mennig, P.W. Oliveira, H. Schmidt , ” Interference coatings on glass based on photopolymerizable nanomer material” , Thin Solid Films , Vol.351 (1999) pp.99-102. 14. Hiroyuki Nakazumi, Taishi Ohta, Hiroyuki Etoh, Takaaki Uno, Christa L. Colyer, Yutaka Hyodo and Shigeyuki Yagi ,” Near-infrared luminescent bis-squaraine dyes linked by a thiophene or pyrene spacer for noncovalent protein labeling”, Syn. Metals., Vol. 153 (2005) pp.33-36. 15. Yang Xiao-Bing, Ding Song-Tao, Yang Yu-Sheng, Zhou, Xiao-Hai ,”A review of near-infrared laser protective dyes” , Chinese Journal of Organic Chemistry,Vol. 22 (2002) pp.33-41. 16. B. Stjerna, E. Olsson and C.G. Granqvist , “Optical and electrical properties of radio frequency sputtered tin oxide films doped with oxygen vacancies, F, Sb, or Mo” , Journal of Applied Physics, Vol.76 (1994) pp.3797-3817. 17. S.Y. Lee, B.O. Park ,“Structural, electrical and optical characteristics of SnO2:Sb thin films by ultrasonic spray pyrolysis” , Thin Solid Films, Vol.510 (2006) pp.154-158. 18. T.R. Giraldi, M.T. Escote, M.I.B. Bernardi, V. Bouquet, E.R. Leite, E. 73 Longo, J.A. Varela , “Effect of thickness on the electrical and optical properties of Sb doped SnO2 (ATO) thin films” , Journal of Electroceramics ,Vol.13 (2004) pp.159-165. 19. 何主亮,邱明傑, ”真空科技”, 中華民國真空科技學會,Vol.12 (1999) pp.4-15. 20. B. S.Hobbs, A. C. C. Tseung ,” The Anodic Oxidation of Hydrogen on Platinized Tungsten Oxides” , Journal of the Electrochemical Society, Vol.120 (1973) pp.766-769. 21.Wu, I.-Y.; Lin, J. T. Wen, Y. S. ,” Near-Infrared Absorbing Organoruthenium Complexes:Crystal Violet Analogues ”, Organometallics , Vol.18(3) (1999) pp.320-327. 22. R. W. Johnson , A. H. Daane, “The lanthanum-boron system”, J. Phys. Chem.,Vol.65 (1961) pp.909-915. 23. R. Schmechel, H. Werheit, Y.B. Paderno, “FT Raman Spectroscopy of Some Metal Hexaborides”, J. Solid State Chem., Vol.133 (1997) pp.234–268. 24.H. Zhang, Q. Zhang, J. Tang, L.C. Qin ,” Single-Crystalline LaB6 Nanowires” , J. Am. Chem. Soc., Vol.127 (2005) pp.2862-2863. 25. Hiromitsu Takeda, Kenji Adachi, Kayo Yabuki ,“Coating solution for forming a film for cutting off solar radiation and the film formed therefrom” , US Patent 6319613 (2001) 26. S. Schelm, G. B. Smith ,” Dilute LaB6 nanoparticles in polymer as optimized clear solar control glazing” , Applied Physics Letters, Vol. 82 (24) (2005) pp.4346-4348. 27. J.M. Lafferty , ”Boride Cathodes”, J. Appl. Phys., Vol.22 (1951) 74 pp.299-309. 28. S. Otani, H. Nakagawa, Y. Nishi, N. Kieda, J. , ” Floating Zone Growth and High Temperature Hardness of Rare-Earth Hexaboride Crystals: LaB6, CeB6, PrB6, NdB6, and SmB6”, Solid State Chem., Vol. 154 (2000) pp.238-241. 29. B. Post, D. Moskowitz, F.W. Glaser , ” Borides of Rare Earth Metals” , J. Am. Chem. Soc., Vol.78 (1956) pp.1800-1802. 30. P. Peshev , ” A Thermodynamic Analysis of Lanthanum Hexaboride Crystal Preparation from Aluminum Flux with the Use of Compound Precursors” , J. Solid State Chem , Vol. 133 (1997) pp.237-242. 31. H. Zhang, J. Tang, Q. Zhang, G. Zhao, G. Yang, J. Zhang, O. Zhou, L.C. Qin ” Field Emission of Electrons from Single LaB6 Nanowires” , Adv. Mater., Vol.18 (2006) pp.87-91. 32. M. Kamaludeen, I. Selvaraj, A. Visuvasama, R. Jayavel, J. , “LaB6 crystals from fused salt electrolysis “ , Mater. Chem., Vol.8 (1998) pp.2205-2207. 33. V. Craciun, D. Craciun , ” Pulsed laser deposition of crystalline LaB6 thin films“ , Appl. Surf. Sci , Vol.247 (2005) pp.384-389. 34. M. Zhanga , L. Yuanb , X. Wanga , H. Fana , X. Wanga , X. Wua , H. Wanga , Y. Qiana ,” A low-temperature route for the synthesis of nanocrystalline LaB6” , Journal of Solid State Chemistry , Vol 181(2008) pp.294-297. 35. L . Zhu , X . Wang ,W . Li , “UV curable ink for digital textile printing” , Shanghai Textile Science & Technology , Vol . 33 No. 10 (2005) pp.14-18. 75 36.陳劉旺, ”工業塗料與高分子化學",高立圖書有限公司,(1997) pp.256. 37.劉建良 ,”UV Curing 發展簡介與應用” ,化工科技與商機,第41期特別報導,(2001) pp.1-4. 38.王得海, ”紫外光固化材料-理論與應用” ,科學出版社,(2001) pp. 127-130. 39.何明錦,李訓谷,王佑萱,蔡介峰,黃尊澤,”節能玻璃設計方法之建立”,中華民國建築學會建築學報,Vol.62 (2007) pp.19~33. 40. CNS 12381-R3161 Testing method on transmittance and reflectance for daylight and solar heat gain coefficient of flat glasses 41.JIS R 3106 Testing method on transmittance, reflectance and emittance of flat glasses and evaluation of solar gain coefficient 42.JIS R 3107 Evaluation on thermal resistance of flat glass and thermal transmittance of glazing 43.C. F. Bohren , D. R. Huffman,”Absorption and Scattering of Light by Small Particles” , John Wiley & Sons , Inc. (1983) pp.369~372. 44.Mayer I. , Zolotov S. , “The thermal decomposition of rare earth and yttrium bromide hydrates”, Journal of Inorganic and Nuclear Chemistry”, Vol.27(9) (1965) pp.1905-1909. 45. Powell J.E., Burkholder H.R. , “The solubilities of lanthanum chloride 7-hydrate and lanthanum chloride 6-hydrate in water, and a study of the thermal decomposition of hydrated lanthanum chloride” , Journal of Inorganic and Nuclear Chemistry , Vol.14 (1-2)(1960) pp. 65-70. 46. Geng Zheng-Song , Zhang Lin , Xie Jian-Jun , “Dehydration Study of 76 Hydrated Lanthanum Chloride LaCl3.7H2O”, Journal of Tongji University (Natural Science) , Vol.33(12) (2005) pp.1704-1706. 47. Ke Qing-Shui , “The new century dictionary of chemical engineering and chemistry”, CHENG WEN BOOK CO. LTD, (2000) pp.1865. 48.于若軍,“現代陶瓷工程學” ,全華圖書,(1985) pp.192 49.張立德,牟季美,“奈米材料和奈米結構” ,滄海書局,(2002) pp.258. |
論文全文使用權限 |
如有問題,歡迎洽詢!
圖書館數位資訊組 (02)2621-5656 轉 2487 或 來信