系統識別號 | U0002-2207200908553400 |
---|---|
DOI | 10.6846/TKU.2009.00817 |
論文名稱(中文) | 前處理程序對於垃圾焚化飛灰再利用為水泥取代料之研究 |
論文名稱(英文) | The pre-treatment process for recovery of MSW incinerator fly ash as cement substitute |
第三語言論文名稱 | |
校院名稱 | 淡江大學 |
系所名稱(中文) | 水資源及環境工程學系碩士班 |
系所名稱(英文) | Department of Water Resources and Environmental Engineering |
外國學位學校名稱 | |
外國學位學院名稱 | |
外國學位研究所名稱 | |
學年度 | 97 |
學期 | 2 |
出版年 | 98 |
研究生(中文) | 李孟翰 |
研究生(英文) | Meng-Han Li |
學號 | 696480192 |
學位類別 | 碩士 |
語言別 | 繁體中文 |
第二語言別 | |
口試日期 | 2009-06-03 |
論文頁數 | 109頁 |
口試委員 |
指導教授
-
高思懷(shgau@mail.tku.edu.tw)
委員 - 曾迪華(dhtseng@ncuen.ncu.edu.tw) 委員 - 孫長榮(jonas@nanya.edu.tw) |
關鍵字(中) |
飛灰 水萃 研磨 磷酸 硫酸鹽 重金屬 健度 |
關鍵字(英) |
Fly ash water-extraction wet-ball-milling phosphoric acid sulphates heavy metals soundness |
第三語言關鍵字 | |
學科別分類 | |
中文摘要 |
都市垃圾焚化飛灰是一種性質複雜且不易處理之有害廢棄物,因此焚化飛灰的回收再利用已成為未來的趨勢,其中將飛灰取代部分水泥製成環保水泥是最具有資源化的潛力,但是飛灰中有氯鹽、重金屬及硫酸鹽等問題,因此處理飛灰中有害物質為再利用前的首要考量。 本研究利用水萃、研磨、磷酸穩定搭配研磨等程序處理焚化飛灰。將處理後飛灰取代部分水泥,製成水泥漿體,以強度及健度等測試來觀察經過處理之後的粉體對於取代水泥後的影響,再以XRD及SEM來觀察卜作嵐反應及水化發展。 由實驗結果得知,飛灰經由水萃程序後,能萃出大量氯鹽、重金屬及硫酸鹽,降低飛灰中硫酸鹽含量及重金屬TCLP之溶出濃度,而鍋爐灰經水萃後仍有13.49 %的SO3,導致取代後漿體膨脹,因此不適用於取代部份水泥。濕式球磨10分鐘內即可降低粒徑至10μm以下,添加10 %能使強度提升6~24 %,健度增加18 %,但是長時間研磨卻會生成CaCO3,對水泥造成傷害。水萃後磷酸穩定搭配研磨10分鐘後能使TCLP低於法規標準,雖然對水泥強度略有影響,但仍優於市售水泥,而且健度能提升11~22 %,因此能真正達到無害化再利用。 |
英文摘要 |
Municipal solid waste incinerator (MSWI) fly ashes (reaction fly ash and boiler fly ash) are hazardous wastes that contained complex compositions cause difficult treating. Recycling of the fly ash will be a future tendency in many countries. Fly ash displaced part of cement as a structure material is a potential technique. However, fly ash contains some adverse materials during recycling process, such as chloride, heavy metals, and sulfur, must be removed or stabilized in the fly ash before recycling. In this study, water extraction and phosphoric acid stabilization with wet ball milling process were used to treat the MSWI fly ash. The water extraction could extract a great quantity of chloride. The phosphoric acid stabilization with wet ball milling process can reduce the particle size of fly ash and stabilize the heavy metals in the fly ash. The analytic methods were used to test the characteristic of the paste as following: the compress strength test and soundness test used to understand the effect of the stabilized finer particles filled the pore of cement paste when the fly ash displaced a part of cement. The XRD and SEM analysis were used to observe the pozzolanic reaction and the hydration development. From the results of the experiment, after the water extraction process, the chloride, heavy metals, and sulfur could be removed from the fly ash. The TCLP concentrations of heavy metals were reduced at the same time. The boiler fly ash still remains 13.49% of SO3 after the water extraction, which brings on the expansion of the paste, it is not suitable for displaced the cement. The 10 minutes of the milling could reduce the particle size below 10μm. 10% additive of treated fly ash could raise 6~24 % and 18% of the compress strength and soundness, respectively. But the long terms of milling, the CaCO3 would be produced and have an adverse effect on the hydration developing. The reaction fly ash through the water extraction, phosphoric acid stabilization, and 10 minutes milling processes, the TCLP concentration can meet the regulatory limit and the soundness could be raise 11-22%, which can reach the aim of non hazardous and recycling. |
第三語言摘要 | |
論文目次 |
目錄 第一章 前言 1 1-1 研究緣起 1 1-2 研究目的 2 第二章 文獻回顧 3 2-1 垃圾焚化飛灰之來源及特性 3 2-1-1焚化飛灰之物理化學性質 4 2-1-2焚化飛灰中重金屬來源與溶出特性 6 2-2 水泥特性與性質 9 2-2-1水泥原料與製程 9 2-2-2波特蘭水泥的分類 10 2-2-3水泥熟料礦物成分與水化作用 11 2-2-4水泥漿體之微觀結構 18 2-2-4-1固相微結構 18 2-2-4-2非固相結構 22 2-3各種不純物對水泥之影響 24 2-4卜作嵐材料之性質與應用 27 2-4-1卜作嵐材料 28 2-4-2飛灰之卜作嵐反應 29 2-4-3卜作嵐材料之相關應用 32 2-5 穩定前處理程序之相關文獻 34 2-5-1水萃處理焚化飛灰 34 2-5-2磷酸穩定重金屬 35 2-5-3研磨粉體技術 37 2-5-3-1研磨理論 37 2-5-3-2研磨對於粉體特性之影響 38 2-5-3-3研磨飛灰對於應用於水泥材料之影響 39 第三章 實驗材料、設備與研究方法 40 3-1 實驗材料 40 3-2 實驗方法 41 3-2-1 實驗設計 41 3-2-2 研究流程圖 42 3-2-3 二段水萃 43 3-2-4 濕式研磨 44 3-2-5 磷酸穩定搭配研磨處理 45 3-3 實驗藥品及器材 46 3-4 實驗設備 47 3-5 分析設備 48 3-6 實驗方法 50 第四章 結果與討論 57 4-1 基本性質分析 57 4-1-1 飛灰性質分析 57 4-1-1-1 pH值、含水率及灼燒減量 57 4-1-1-2 粒徑分析 58 4-1-1-3 元素分析與重金屬含量 58 4-1-1-4 TCLP溶出濃度 59 4-1-2 水萃飛灰性質分析 60 4-1-2-1水萃飛灰粒徑分析 60 4-1-2-2水萃飛灰元素與重金屬含量 61 4-1-2-3水萃飛灰TCLP溶出濃度 62 4-2 硫酸鹽對水萃飛灰取代水泥之影響 63 4-2-1 水萃對飛灰中硫酸鹽之影響 63 4-2-1-1水萃前後飛灰XRD晶相物種分析 63 4-2-1-2水萃前後飛灰硫酸鹽含量分析 65 4-2-2 硫酸鹽對水泥漿體之影響 67 4-2-2-1水萃飛灰水泥抗壓強度分析 67 4-2-2-2水萃飛灰水泥漿體SEM分析 68 4-3 研磨水萃反應灰取代水泥之影響 70 4-3-1 研磨處理對水萃反應灰之影響 70 4-3-1-1研磨時間對粒徑之影響 70 4-3-1-2研磨處理對XRD物種分析及研磨液濃度之影響 71 4-3-1-3研磨處理對TCLP及研磨液重金屬溶出之影響 74 4-3-2 研磨處理對水泥漿體的影響 76 4-3-2-1抗壓強度發展 76 4-3-2-2健度分析 81 4-3-2-3凝結時間 83 4-3-2-4水泥漿體SEM分析 84 4-3-2-5水泥漿體XRD分析 88 4-4 磷酸穩定搭配研磨對水萃反應灰取代水泥之影響 92 4-4-1 磷酸穩定搭配研磨對水萃反應灰的影響 92 4-4-1-1磷酸穩定搭配研磨之TCLP溶出濃度 92 4-4-1-2磷酸穩定搭配研磨之XRD晶相物種分析 94 4-4-2 磷酸穩定搭配研磨對水泥漿體的影響 95 4-4-2-1水泥漿體抗壓強度發展 95 4-4-2-2健度分析 96 4-4-2-3水泥漿體SEM分析 97 第五章 結論與建議 99 5-1結論 99 5-2建議 100 參考文獻 101 圖目錄 圖 2-1 水泥製造程序圖 9 圖 2-2 卜作嵐物質與氫氧化鈣封孔效應圖 29 圖 2-3 飛灰反應示意圖 31 圖 3-1 研究流程圖 42 圖 3-2 研究流程圖 43 圖 3-2 桌上型球磨機 47 圖 4-1 反應灰、鍋爐灰的粒徑分佈 58 圖 4-2 水萃灰粒徑分析 61 圖 4-3 反應灰水萃前後XRD圖 64 圖 4-4 鍋爐灰水萃前後XRD圖 64 圖 4-5 飛灰第一段水萃液沈澱物XRD圖 66 圖 4-6 水萃飛灰水泥漿體之抗壓強度 68 圖 4-7 水萃鍋爐灰取代水泥後的膨脹現象 68 圖 4-8 水萃鍋爐灰取代後之SEM圖 69 圖 4-9 水萃鍋爐灰取代後之SEM圖 69 圖 4-10 不同研磨時間之d50分佈圖 71 圖 4-11 不同研磨時間之粒徑分佈圖(水) 71 圖 4-12 研磨水萃反應灰之XRD圖(水) 72 圖 4-13 不同研磨時間下的Ca(OH)2變化量 73 圖 4-14 不同研磨時間下的CaCO3變化量 73 圖 4-15 研磨水萃反應灰之XRD圖(乙醇) 74 圖 4-16 研磨水萃反應灰取代後於各齡期之抗壓強度圖 78 圖 4-17 研磨水萃反應灰取代後於各齡期之相對強度圖 79 圖 4-18 研磨60分水萃反應灰取代後之膨脹情形 79 圖 4-19 兩種研磨液研磨不同時間於28天齡期之相對強度圖 80 圖 4-20 兩種研磨液研磨60分於各齡期之相對強度圖 80 圖 4-21 60天健度分析之樣品外觀 81 圖 4-22 研磨水萃反應灰取代後之60天健度分析 82 圖 4-23 研磨水萃反應灰取代後之60天健度比較分析 82 圖 4-24 純水泥漿體SEM分析(3天) 85 圖 4-25 研磨水萃反應灰10分鐘漿體SEM分析(3天) 85 圖 4-26 研磨水萃反應灰30分鐘漿體SEM分析(3天) 85 圖 4-27 純水泥漿體SEM分析(7天) 86 圖 4-28 研磨水萃反應灰10分鐘漿體SEM分析(7天) 86 圖 4-29 研磨水萃反應灰30分鐘漿體SEM分析(7天) 86 圖 4-30 純水泥漿體SEM分析(28天) 87 圖 4-31 研磨水萃反應灰10分鐘漿體SEM分析(28天) 87 圖 4-32 研磨水萃反應灰30分鐘漿體SEM分析(28天) 87 圖 4-33 純水泥漿體XRD圖 89 圖 4-34 水萃反應灰水泥漿體XRD圖 90 圖 4-35 研磨10分水萃反應灰水泥漿體XRD圖 90 圖 4-36 研磨30分水萃反應灰水泥漿體XRD圖 91 圖 4-37 研磨60分水萃反應灰水泥漿體XRD圖 91 圖 4-38 磷酸穩定搭配研磨水萃反應灰之60天健度分析 97 圖 4-39 0.02M磷酸穩定之水萃反應灰漿體SEM分析(3天) 98 圖 4-40 0.2M磷酸穩定之水萃反應灰漿體SEM分析(3天) 98 圖 4-41 0.8M磷酸穩定之水萃反應灰漿體SEM分析(3天) 98 表目錄 表 2-1 垃圾中重金屬來源 6 表 2-2 波特蘭水泥主要成分表 11 表 2-3 波特蘭水泥化學簡寫符號說明 11 表 2-4 各類型水泥之成分含量及性質 12 表 2-5 波特蘭第Ⅰ型水泥之化學成分與物理性質標準規定 13 表 2-6 矽酸鈣鹽類之水化過程及機理 14 表 2-7 水泥漿體之微結構組成及特性 21 表 2-8 水泥漿體非固相結構分類與性質 24 表 2-9 礦粉摻料之種類與材料 27 表 2-10 飛灰之化學及物理性質要求 32 表 2-11 磷酸鹽礦物的Ksp值 37 表 3-1 實驗藥品 46 表 3-2 實驗材料器具 46 表 4-1 飛灰物理性質 58 表 4-2 反應灰、鍋爐灰主要組成元素分析 59 表 4-3 反應灰、鍋爐灰之重金屬含量 59 表 4-4 飛灰TCLP溶出濃度 60 表 4-5 水萃灰主要組成元素分析 61 表 4-6 水萃灰之重金屬含量 62 表 4-7 水萃反應灰及水萃鍋爐灰TCLP溶出濃度 62 表 4-8 飛灰水萃廢液濃度 65 表 4-9 飛灰水萃前後硫化物含量 67 表 4-10飛灰水萃液中硫化物含量 67 表 4-11 水萃反應灰研磨液濃度 74 表 4-12 研磨水萃反應灰TCLP重金屬濃度 75 表 4-13 水萃反應灰研磨液重金屬濃度 76 表 4-14 研磨水萃反應灰水泥漿體之凝結時間 83 表 4-15 磷酸穩定搭配研磨之TCLP重金屬濃度 93 表 4-16 磷酸穩定搭配研磨之研磨液重金屬濃度 93 表 4-17 磷酸穩定搭配研磨之XRD分析 94 表 4-18 磷酸穩定搭配研磨取代後之抗壓強度 96 |
參考文獻 |
Abbas, Z., Moghaddama, A.P., and Steenarib, B.M. (2003) “Release of salts from municipal solid waste combustion residues”, Waste management, 23, 291-305. ACI 232.1R, “Proposed report:Use of Natural Pozzolans in Concrete”, ACI Material Journal, 91(4), 410-426, 1994. Andac, M., and Glasser, F.P. (1998) “The effect of test conditions on the leaching of stabilised MSWI-fly ash in Portland cement”, Waste management, 18, 309-319. Buchholz, B.A., and Landsberger, S. (1993) “Trace metal Analysis of size-fractioned municipal solid waste incinerator fly ash and its leachates”, Journal of Environmental Science and Health, A28(2), 1119~1123. Cheriaf, M., Cavalcante Rocha J., and Pera J. (1999) “Pozzolantic properties of pulverized coal combustion bottom ash”, Cement and Concrete Research, 29, 1387-1391. Crannel, B., Eighmy, T., Krzanowski, J., Eusden, D., Shaw, E., and Francis, C. (2000) “Heavy metal stabilization in municipal solid waste bottom ash using soluble phosphate”, Waste management, 20, 135-148. Derie, R. (1996) “A new way to stablilize fly ash from municipal incinerators”, Waste management, 16(8), 711-716. Eighmy, T.T., Eusden, J.D., and Krzanowski, J.E. (1995) “Comprehensiveapproach toward understanding element speciation and leaching behaviorin municipal solid waste incineration electrostatic precipitator ash”, Environmental Science and Technology, 29(3), 629-646. Eighmy, Y.T., Crannell, B.S., Butler, L.G., Cartledge, F.K., Emery, E.F., Oblas, D.O., Krzanowski, J.E., Eusden, J.D., Shae, E.L., and Francis, C.A. (1997) “Heavy metal stabilization in municipal solid waste combustion dry scrubber residue using soluble phosphate”, Environmental Science and Technology, 31(11), 3330-3338. Erdogdu, K., and Turker, P. (1998) “Effects of fly ash particle size on strength of Portland cement fly ash mortars”, Cement and Concrete Research, 28(9), 1217-1222. Ezequiel, C.S., Enrique, T.M., Cesar, D., Fumio, S. (2006) ” Effects of grinding of the feldspar in the sintering using a planetary ball mill”, Journal of Materials Processing Technology, 152(3), 284-290. Gau, S.H., and Jeng, W.C. (1998) “Influence of ligands on metals leachability from landfilling bottom ashes ”, Journal of Hazardous Materials, 58, 59-71. Glordano, P.M., Behel, A.D., Edward, L.Jr., Edward, Jr., Sollean, J.M., and Bradford, B.N. (1983) “Mobility in Soil and Plant Avaliability of Metals of Derived from Incinerated Municipal efuse”, Environmental Science and Technology, 17, 193-198. Heegn, H., Birkeneder, F., and Kamptner, A. (2003) “Mechanical activation of precursors for nanocrystalline materials”, Crystal Research Technol. 38(1), 7–20. Huang, S.J., Chang, C.Y., Mui, D.T., Chang, F.C., Lee, M.Y., and Wang, C.F. (2007) “Sequential extraction for evaluating the leaching behavior of selected elements in municipal solid waste incineration fly ash”, Journal of Hazardous Materials, 149, 180-188. Kiattekomol, K., Chai J., Smith S., and Cutubtim, S. (2001) “A study of gound coarse fly ashes with different fineness from various sources as pozzolanic materials”, Cement and Concrete Research, 23, 335-343. Kim, J.M., and Kim, H.S. (2004) “Glass-ceramic produced from a municipal waste incinerator fly ash with high Cl content”, Journal of the European Ceramic Society, 24, 2373-2382. Kosson, D.S., Sloot, H.A., and Eighmy, T.T. (1996) “An approach for estimation of contaminant release during utilization and disposal of municipal wastecombustion residues”, Journal of Hazardous Materials, 47( 2-3), 43-75. Laperche, V., Traina, S.J., Gaddam, P., and Logan, T.J. (1996) “Chemical and mineralogical characterizations of Pb in a contaminated soil: reactions with synthetic apatite”, Environmental Science and Technology, 30(11), 3321-3326. Lee, H.Y. (2007) “Characteristics and heavy metal leaching of ash generated from incineration of automobile shredder residue”, Journal of Hazardous Materials, 147, 570-575. Mangialardi, T., Paolini, A.E., Polettini, A., and Sirini, P. (1999) ” Optimization of the solidification/stabilization process of MSW fly ash in cementitious matrices” Journal of Hazardous Materials, 70(1-2), 53-70. Matsunaga T., Kim, J.K., Hardcastle, S., and Rohatgi, P.K. (2002) “Crystallinity and selected properties of fly ash particles”, Materials Science and Engineering, A325, 333-343. Mehta, P.K. and J.M, Montliro,Concrete-Structure, Properties and Materials, Prentice-Hall Inc. Englewood Cliff, N. J. (1986) Mindess, S., and J. F. Yuong, concrete, Prentice-Hall Inc. Englewood Cliff, N. J.(1998). Mizutani, S., Yoshida, T., Saikia, S., and Takatsuki, H. (1996) “Release of metals from MSWI fly ash and availability in alkali condition” Waste Manage, 16(5/6), 537-544. Malhotra and Metha, P.K. (2005) “High-Performance,High-Volum Fly Ash Concrete”, 2nd Ed. Montinaro,Concas,Pisu,Cao. (2007) “Remediation of heavy metals contaminated soils by ball milling”, Chemosphere, 67, 631-639. Nomura, Y., Okada, T., Nakai, S., and Hosomi, M. (2006) “Inhibition of heavy metal elution from fly ashes by mechanochemical treatment and cementation”, Kagaku Kogaku Ronbunshu, 32, 196-199. Osawaru A.O., and Forssberg, E. (1991) “Surface and structural changes in wet ground minerals”, Powder Technology, 68(1), 23-29. Paasivirta, J. (1991) “Chemical Ecotoxicology”, Lewis Publishers, Inc. Piantone, P., Bodénan, F., Derieb, R., and Depelsenairec, G. (2003) “Monitoring the stabilization of municipal solid waste incineration fly ash by phosphoric: mineralogical and balance approach”, MSW combustion residues”, Waste management, 23, 225-243. Sahmaran, S., Erdem, T.K., and Yaman, I.O. (2007) “Sulfate resistance of plain and blended cements exposed to wetting–drying and heating–cooling environments”, Construction and Building Materials, 21, 1771-1778. Sukrut, S. Thipse, Mirko Schoenitz and Edward L. Dreizin, (2002) “Morphology and composition of the fly ash partical produced in incineration of municipal solid waste”, Fuel Processing Technology, 75(3), 173-184. Van Herck, P., and Vandecasteele, C. (2001) “Evaluation of the use of a sequential extraction procedure for the characterization and treatment of metal containing solid waste.” Waste Manage, 21, 685-694. Wey, M.Y., Liu, K.Y., Tsai, T.H., and Wei, M.C. (2006) “Thermal treatment of the fly ash from municipal solid waste incinerator with rotary kiln.”, Journal of Hazardous Materials, 137, 981-989. Wiles, C.C. (1996) “Municipal solid waste combustion ash: state-of-the-knowledge”, Journal of Hazardous Materials, 47, 325-344. Yang, J., Mosby, D.E., Casteel, S.W., and Blanchar, R.W. (2001) “Lead Immobilization Using Phosphoric Acid in a Smelter-Contaminated Urban Soil”, Environmental Science and Technology, 35(17), 3553-3559. Young, J.F. (1981) “The Microstructure of Hardened Protland Cement Pastes”,Edited by Bazant, Z. P. and Witlman, F. H. Yvon, J., Anteucci, D., Jdid, E., Lorenzi, G., Dutre, V., Leclerq, D., Nielsen, P., and Veschkens, M. (2006) “Long-term stability in landfills of Municipal Solid Waste Incineration fly ashes solidified/stabilized by hydraulic bibders.”, Journal of Geochemical Exploration, 90, 143-155. Zhang, P., and Ryan, J.A. (1998a) “Formation of pyromorphite in anglesite- hydroxyapatite suspensions under varying pH conditions”, Environmental Science and Technology, 32(21), 3318-3324. Zhang, P., Ryan, J.A., and Yang, J. (1998b) “In vitro soil Pb solubility in the presence of hydroxyapatite”, Environmental Science and Technology, 32(18), 2763-2768. Zhao, Y., Song, L., and Li, G. (2002) “Chemical stabilization of MSW incinerator fly ashes”, Journal of Hazardous Materials, B95, 47-63. 江康鈺、胡友馨、周娉慧,「利用水洗及調質處理技術降低焚化飛灰熔融過程污染物排放之研究」,第22屆廢棄物處理技術研討會論文集,2007。 何鴻哲,「垃圾焚化飛灰中揮發性重金屬之移動特性」,博士論文,淡江大學水資源及環境工程研究所,2008。 李建中、李釗、何啟華與鄭清江,「垃圾焚化灰燼之力學特性與在大地工程之應用」,一般廢棄物灰渣資源化技術與實務研討會論文集,p.193,1996。 沈永年、王和源、林仁益、郭文田,「混凝土技術」,全華出版社,台北,2002。 沈得縣,「高爐熟料與飛灰之卜作嵐反應機理及對水泥漿體巨微觀性質影響之研究」,博士論文,國立台灣工業技術學院,台北1991。 吳志偉,「矽質微奈米材料對混凝土工程性質之探討」,碩士論文,國立台灣科技大學營建工程研究所,2008。 林家宏,「飛灰調質熔渣成份對卜作嵐反應特性之影響」,碩士論文,國立中央大學環境工程研究所,2004。 林凱隆,「都市垃圾焚化熔渣粉體調製環保水泥之卜作嵐反應特性研究」,博士論文,國立中央大學環境工程研究所,2002。 林炳炎,飛灰用在混凝土,現代營建雜誌社,台北,1991。 周錦東、蕭溫華、何鴻哲,「水洗與磷酸前處理對垃圾焚化飛灰之穩定作用」,第十九屆廢棄物處理技術研討會論文集,2004。 高思懷,林家禾,「垃圾焚化飛灰中無機鹽對重金屬溶出之影響」,第十屆廢棄物處理技術研討會,p247~254,1995。 黃兆龍,「混凝土性質與行為」,詹式書局,台北,1998.2。 黃彥為,「高能球磨飛灰內重金屬在高溫環境下穩定之研究」,碩士論文,淡江大學水資源及環境工程研究所,2008。 黃尊謙,都市垃圾焚化飛灰熔融處理取代部分水泥之研究,碩士論文,國立中央大學環境工程研究所,1999。 莊家榮,「濕式研磨對MSWI飛灰特性影響之研究」,碩士論文,淡江大學水資源及環境工程研究所,2006。 楊金鐘、周順裕,「利用磷酸穩定化處理都市垃圾焚化飛灰之效果評估」,第十二屆廢棄物處理技術研討會論文集。 楊金鐘與吳裕民,「垃圾焚化灰渣穩定化產物再利用之可行性探討」,一般廢棄物焚化灰渣資源化技術與實務研討會論文集,p.43,,1996。 楊萬發、李穆生,「垃圾及其焚化飛灰之污染特性」,環境工程會刊,第一卷,第四期,52~65頁,1990。 楊國銘,添加零維奈米材料對水泥漿及水泥砂漿材料性質之影響,碩士論文,國立台灣科技大學營建工程研究所,2004。 葉宗智,「垃圾焚化飛灰粒徑對燒結效果之研究」,碩士論文,國立中央大學環境工程研究所,1997。 劉裕意,「添加卜作嵐材料對混凝土耐久性影響之探討」,碩士論文,國立台灣海洋大學河海工程研究所,2001。 陳佑倫,「都市垃圾焚化飛灰再利用作為水泥替代物之研究」,碩士論文,淡江大學水資源及環境工程研究所,2007。 陳達松,「水萃研磨程序對都市垃圾焚化飛灰重金屬穩定之影響」,碩士論文,淡江大學水資源及環境工程研究所,2008。 蓋國胜,「超微粉體技術」,化學工業出版社,北京,2004. 5。 蔡德明,行政院公共工程委員會「公共工程飛灰混凝土使用手冊」,1999。 蔡孟翰,「硫酸鹽對垃圾焚化灰渣全利用於燒結水泥之影響」,碩士論文,輔英科技大學環境工程與科學研究所,2006。 鐘元章,「垃圾焚化飛灰以磷酸無害化處理之研究」,碩士論文,淡江大學水資源及環境工程研究所,2001。 顏旭堯,「以不同試驗法探討添加卜特蘭材料對混凝土微觀特性影響之研究」,碩士論文,國立海洋大學材料工程研究所,2000。 蘇寶洲,「普蜀蘭反應對碳酸鈣白華之影響機制」,碩士論文,國立成功大學土木工程研究所,2002。 龔人俠,「水泥化學概論」,台灣區水泥工業同業公會,台北,1977。 行政院環境保護保署- http://www.epa.gov.tw/ 中國國家標準(CNS)- http://www.cnsonline.com.tw/ |
論文全文使用權限 |
如有問題,歡迎洽詢!
圖書館數位資訊組 (02)2621-5656 轉 2487 或 來信