系統識別號 | U0002-2006200512354600 |
---|---|
DOI | 10.6846/TKU.2005.00421 |
論文名稱(中文) | 從貿易型態分析產業內貿易之決定因素 |
論文名稱(英文) | The Determinant of Intra-Industry Trade from the Analysis of Trade Pattern. |
第三語言論文名稱 | |
校院名稱 | 淡江大學 |
系所名稱(中文) | 國際貿易學系國際企業學碩士班 |
系所名稱(英文) | Department of International Trade |
外國學位學校名稱 | |
外國學位學院名稱 | |
外國學位研究所名稱 | |
學年度 | 93 |
學期 | 2 |
出版年 | 94 |
研究生(中文) | 宋惠娟 |
研究生(英文) | Hui-Chuan Sung |
學號 | 692481558 |
學位類別 | 碩士 |
語言別 | 繁體中文 |
第二語言別 | |
口試日期 | 2005-06-02 |
論文頁數 | 73頁 |
口試委員 |
指導教授
-
蔡政言
委員 - 楊曉文 委員 - 賈昭南 |
關鍵字(中) |
產品類別 產業內貿易 垂直專業化 水平專業化 區域性 |
關鍵字(英) |
Product Categories Intra-Industry Trade Vertical Specialization Horizontal Specialization Regionalization |
第三語言關鍵字 | |
學科別分類 | |
中文摘要 |
本文主要是探討台灣和貿易國的產業內貿易現象,採用混合資料的最小平方法為實證方法,並分為基本模型及區域虛擬變數模型,以探討不同貿易型態的產業內貿易決定因子,並觀察區域對各產業的產業內貿易之影響。 實證研究發現,以基本模型來看,國民所得差異和每人國民所得差異均對消費性產業的IIT呈負相關,平均國民所得和每人平均國民所得均對非消費性產業的IIT呈正相關;海外直接投資對消費性和多製程產業的IIT呈正相關;匯率變動率對消費性和非消費性產業的IIT呈負相關;距離對大多數產業的IIT呈負相關,皆說明不同變數對各產業有不同的影響。 以區域虛擬變數模型來看,每個變數對各產業的結果大致不變;區域方面,美洲、歐洲和澳洲的虛擬變數均對多數非消費性產業的IIT呈負相關,另外歐洲虛擬變數則對所有消費性產業的IIT呈負相關,說明不同的區域因素對各產業的影響,也可發現台灣和亞洲對各產業的產業內貿易程度比其他區域高。 雖然本文的實證結果會對所有產業的決定因子有進步的了解,然而實證和理論預期有不合的現象仍有待後續研究補充與證明,如平均國民所得和海外直接投資。此外,也希望後繼學者能對產業內貿易的現象和貿易政策作深入的探討,這樣不僅對各國各產業的產業內貿易發展有更進一步的了解,也能爲國家帶來更多的整體利得。 |
英文摘要 |
This thesis mainly investigates phenomenon of intra-industry trade between Taiwan and its trade partners. The thesis adopts pooling least squares method as empirical method, including a basic model and a regional dummy variable model, to investigate key factors of intra-industry trade from different trade pattern, and to observe regional influence on intra-industry trade of every different industry. We find that, according to basic model, difference in national income and difference in per capita national income present negative correlations to intra-industry trade of consuming-goods industries, average national income and average per capita national income present positive correlations to intra-industry trade of nonconsuming-goods industries, and foreign direct investment presents positive correlations to intra-industry trade of consuming-goods and value-added manufactuing industries. However, Exchange rate change rate presents negative correlations to intra-industry trade of consuming-goods, and non-consuming-goods industries; distance presents negative correlations to intra-industry trade of most industries. Finally, all prove that different variables have different influences on every industry. According to regional dummy variable model, every variable does not roughly change across industries. However, regional variables of America, Europe and Australia present negative correlations to intra-industry trade most nonconsuming-goods industries, and regional variables of Europe presents negative correlation to intra-industry trade of all consuming-goods industries. We also prove that different regional factors impact every industry and that Asia is higher than any other area. Although our empirical result shows progressive knowledge of the key factors of all industries, the empirical result seems not reflect what the theory is expected to. It relies on the further studies to find supplementary evidence and a formal proof. Finally, based on our finding, further research regarding to trade policy is worthy of exploring. |
第三語言摘要 | |
論文目次 |
目錄 第一章 緒論…………………1 第一節 研究動機與目的………………………………1 第二節 研究架構………………………………………2 第三節 研究方法………………………………………4 第四節 研究限制………………………………………4 第二章 文獻回顧………………………………………5 第一節 國內文獻回顧…………………………………6 第二節 國外文獻回顧…………………………………8 第三章 產業內貿易理論………………………………10 第一節 傳統貿易理論…………………………………10 第二節 產業內貿易的定義……………………………10 第三節 產業內貿易的成因和決定因子………………11 第四節 產業內貿易的衡量方法………………………14 第四章 資料分析………………………………………18 第一節 資料來源及處理………………………………18 第二節 貿易國產品概況之分析………………………19 第三節 產業內貿易指數之分析………………………34 第四節 貿易國總體概況之分析………………………36 第五章 實證模型分析…………………………………50 第一節 實證模型設定…………………………………50 第二節 變數的意義與處理……………………………52 第三節 實證結果分析…………………………………54 第六章 結論與建議……………………………………66 第一節 結論……………………………………………66 第二節 建議……………………………………………70 參考文獻………………………………………………71 表目錄 表 2-1 國內實證文獻回顧彙整………………………6 表 2-2 國外實證文獻回顧彙整………………………8 表 4-1 各變數的資料來源……………………………18 表 4-2 SITC二碼產品…………………………………20 表 4-3 SITC 0碼:各年度與我產業內貿易最大和最小的國家…23 表 4-4 SITC 1碼:各年度與我產業內貿易最大和最小的國家…24 表 4-5 SITC 2碼:各年度與我產業內貿易最大和最小的國家…25 表 4-6 SITC 3碼:各年度與我產業內貿易最大和最小的國家…26 表 4-7 SITC 4碼:各年度與我產業內貿易最大和最小的國家…28 表 4-8 SITC 5碼:各年度與我產業內貿易最大和最小的國家…29 表 4-9 SITC 6碼:各年度與我產業內貿易最大和最小的國家…30 表 4-10 SITC 7碼:各年度與我產業內貿易最大和最小的國家…31 表 4-11 SITC 8碼:各年度與我產業內貿易最大和最小的國家…32 表 4-12 SITC 9碼:各年度與我產業內貿易最大和最小的國家…33 表 4-13 SITC 二碼產品IIT之敘述統計……………………………35 表 4-14 2000年產業內貿易指數Bj之次數分配表…………………36 表 4-15 台灣與貿易國國民所得差額之敘述統計…………………38 表 4-16 台灣與貿易國國民所得之差額……………………………39 表 4-17 台灣與貿易國每人國民所得差額之敘述統計……………40 表 4-18 台灣與貿易國每人國民所得之差額………………………41 表 4-19 台灣與貿易國的平均國民所得之敘述統計………………42 表 4-20 台灣與貿易國的平均國民所得……………………………43 表 4-21 台灣與貿易國的平均每人國民所得之敘述統計…………44 表 4-22 台灣與貿易國的平均每人國民所得………………………45 表 4-23 台灣到貿易國的海外投資之敘述統計……………………46 表 4-24 台灣到貿易國的對外投資…………………………………47 表 4-25 台灣對貿易國通貨的匯率變動率之敘述統計……………48 表 4-26 台幣對貿易國通貨之匯率變動率…………………………49 表 5-1 SITC二碼產品之基本模型實證結果………………………58 表 5-2 SITC二碼產品之區域虛擬變數模型實證結果……………64 表 5-3 基本模型和區域虛擬變數模型之結果比較………………65 圖目錄 圖 1-1研究架構流程圖………………………………………3 |
參考文獻 |
中文部分 呂 玲(1985),「國際貿易標準分類(第一次修訂)中文譯本」,經濟專論(55),台北:中華經濟研究院。 林貞瑩(2000),「日本與台灣間產業內貿易之研究」,國立東華大學企業管理學系碩士論文。 胡翠芳(1994),「兩岸產業內貿易分析」,東吳大學經濟研究所碩士論文。 郭倫岑(2000),「兩岸農產品垂直與水平產業內貿易之研究」,屏東科技大學農企業管理系碩士論文。 黃國恩(1988),「台灣地區產業內貿易的測量與決定因子」,逢甲大學經濟研究所碩士論文。 鄧岱賢(1998),「產業內貿易之研究─台灣與東南亞國家之互動分析」,國立台灣大學三民主義研究所碩士論文。 歐陽遠珍(2000),「台灣與東協五國農產品產業內貿易及決定因子的探討」,國立台灣大學農業經濟學研究所碩士論文。 英文部份 Aquino, A., (1978), “Intra-Industry Trade and Inter-Industry Specialization as Concurrent Sources of Interenational Trade in Manufactures,” Weltwirtschaftliches Archiv, vol.114, pp.275-296. Appleyard, D. and A. Field, (2001), International Economics Trade,Theory and Policy, McGraw-Hill , pp.179-182. Balassa, B., (1966a), “Tariff Reduction and Trade in Manufactures among Industrial Countries,” American Economic Reviews, vol.56, pp.466-473. Balassa, B., (1966b), “Ameriacn Direct Investment in the Common Market,” Banca Nazionale del Lavoro Quarterly Review, vol.77, pp.121-146. Balassa, B.,(1967), Trade Liberalization among Industrial Countries:Objectives and Alternatives, Mc Graw-Hill for the Council on Foreign Relations, Chapter 5. Balassa, B., (1975), EuropeanEconomicIntegration, Amsterdam: North-Holland, Chapter 2. Balassa, B., (1979), “Intra-Industry Trade and the Integration of Developing Countries in the World Economy,” in On the Economics of Intra-Industry Trade, (ed. H.Giersch), pp.245-270. Balassa, B. and L. Bauwens, (1987), “Intra-industry Specialisation in Multi-Country and Multi-Industry Framework,” The Economic Journal, vol. 97, no. 388, pp.923-939. Brander, J.,(1981), “Intra-Industry Trade in Identical Commodities,” Journal of International Economics, vol.11, pp.1-14. Caves, R., (1981), “Intra-Industry Trade and Market Structure in the Industrial Countries, ” Oxford Economic Papers, vol.33, pp.203-223. Culem, C. and L. Lundberg, (1986), “The Product Pattern of Intra-Industry Trade: Stability among Countries and over Time,” Weltwirtschaftliches Archiv, vol.122, pp.113-130. Clark, D. and D. Stanley, (1999), “Determinants of Intra-Industry Trade Between Developing Countries and the United States,” Journal of Economic Development, vol. 24, no. 2, pp.79-95. Falvey, R. (1981), “Commercial Policy and Intra-Industry Trade,” Journal of International Economics, vol.11, pp.495-511. Grubel, H. and P. Lloyd, (1971), “The Empirical Measurement of Intra-Industry Trade,” Economic Record, vol.47, pp.494-517. Grubel, H and P. Lloyd, (1975), “Intra-Industry Trade. London:Macmillan. Helpman, E., (1981), “International Trade in the Presence of Product Differentiation,Economies of Scale and Monopolistic Competition:A Chamberlin-Heckscher-Ohlin Approach,” Journal of International Economic, ,vol.11, pp.305-340. Krugman, P., (1979), “Scale Economies, Product Differentiation, and the Pattern of Trade,” American Economic Reviews, vol.70, pp.950-959. Lancaster, K., (1980), “Intra-Industry Trade under Perfect Monopolistic Competition,” Journal of International Economics, vol.10, pp151-175. Linder, B., (1961), An Essay on Trade and Transportation. New York:John Wiley. Loertscher, R. and F. Wolter, (1980), “Determinants of Intra-Industry Trade:Among Countries and across Industries,” Weltwirtschaftliches Archiv, vol.116, pp.75-90. Markusen, J., J. Melvin, W. Kaempfer and K. Maskus, (1995), International Trade, theory and evidence, McGraw-Hill, pp.204-206, pp.228-236. Pagoulatos, E. and R. Sorensen, (1975), “Two-Way International Trade:an Econometric Analysis,” Weltwirtschaftliches Archiv, vol.111, no.3, pp.454-465. |
論文全文使用權限 |
如有問題,歡迎洽詢!
圖書館數位資訊組 (02)2621-5656 轉 2487 或 來信