系統識別號 | U0002-1907201211022000 |
---|---|
DOI | 10.6846/TKU.2012.00793 |
論文名稱(中文) | 婚紗市場重要服務屬性之研究-以淡江大學學生為例 |
論文名稱(英文) | An Investigation of the Significant Attributes of Service in Wedding Industry- A Case Study of College Students at Tamkang University |
第三語言論文名稱 | |
校院名稱 | 淡江大學 |
系所名稱(中文) | 統計學系碩士班 |
系所名稱(英文) | Department of Statistics |
外國學位學校名稱 | |
外國學位學院名稱 | |
外國學位研究所名稱 | |
學年度 | 100 |
學期 | 2 |
出版年 | 101 |
研究生(中文) | 陳冠儒 |
研究生(英文) | Guan-Ru Chen |
學號 | 699650064 |
學位類別 | 碩士 |
語言別 | 繁體中文 |
第二語言別 | |
口試日期 | 2012-06-21 |
論文頁數 | 121頁 |
口試委員 |
指導教授
-
温博仕
委員 - 林豐政 委員 - 陳麗菁 |
關鍵字(中) |
共同設計 聯合分析 婚紗禮服 |
關鍵字(英) |
Co-design Conjoint Analysis Wedding Dress |
第三語言關鍵字 | |
學科別分類 | |
中文摘要 |
受到大環境影響,台灣男性和女性的平均結婚年齡有逐年提高的趨勢,此現象也間接導致台灣婚紗市場的競爭更加激烈,台灣社會受少子化的影響,使得結婚新人及雙方家庭對結婚之各種程序,尤其在婚紗禮服及攝影上的考慮或選擇更加慎重與重視。如何成功爭取客源並且在最少的成本下創造最大的收益,必須對於新人在婚紗攝影的喜好與選擇上有一定程度的了解與掌握,才能達到建立永續經營的目標,而婚紗禮服的客製化將會是未來婚紗市場的主要發展方向之一。 多數婚紗攝影業者並未提供真正符合個人需求或偏好的產品,因此本研究透過共同設計的概念,並利用聯合分析方法找出最佳化的婚紗攝影套裝產品組合設計,除了使消費者滿足個人偏好並從中獲取獨特的服務需求外,同時業者亦可提高利潤及增加消費者之滿意度,另可避免或降低在開發新產品時的潛在風險問題。為了達成此目標,本研究應用與專家業者的訪談,搭配研擬的第一階段問卷,調查消費者對於婚紗禮服所重視的主要屬性,計算出受訪者對於婚紗禮服不同屬性的重視程度,搭配不同屬性的各種水準組成多個受測體,再進行第二階段的問卷調查,探討消費者所重視的婚紗禮服屬性重要程度,找出學生族群、不同區隔變數以及個別消費者偏好的婚紗禮服產品組合,提供婚紗業者在行銷上的參考。 經本研究結果發現,學生族群消費者對於婚紗禮服的價格特別重視,顯示婚紗禮服的價格決定了學生族群偏好程度的主因,其次是顏色、款式和舒適度。因此,在執行共同設計服務時,應根據產品的定位族群,在價格上做適當的調整;顏色、款式與修飾度方面則應針對不同族群的消費者需求,提供消費者更多的選擇空間,進而創造出符合消費者個人風格的婚紗禮服產品,以達到業者與消費者的共同受益 目標。 |
英文摘要 |
There is a trend that the average age of getting married is rising annually under the impact of the social, political, and economic environment. The phenomenon indirectly leads to a more competitive market of Taiwanese wedding dress business. The newly-weds and their families from both sides deal cautionsly with the preparation of wedding ceremony, especially for the selection of the wedding dress and photography, due to the less number of the newly-wed couples each year in Taiwan recently. The business must know the preferences of the newly-weds on their wedding dress and photography well, so that she can attract the attention of the potential buyers to create her revenue. Thus, the custimization of the wedding dress and photography will be one major direction for future development. Consequently, customized wedding dress will be one of the mainstream in wedding dress factory in the future. However, most wedding dress and photography business do not really provide products that either meet requirements of consumers or satisfy their preference. Therefore, the study aims to find out the optimization of the combination of wedding dress and photography product via the concept of Co-design and by Conjoint Analysis. Except for satisfying consumers’ preference and providing customized service, the dealers can also increase profits and customer satisfaction to avoid and reduce the potential risk of product development and innovation. For this purpose, the research takes advantage of interviews with professional businessmen, along with formulated first-stage questionnaire to look into the main attribute of wedding dress that consumers value, and then makes use of the concept of Co-design and employs Conjoint Analysis to calculate the extent of attention that interviewees pay to wedding dress of various attributes, collocate the number of samples from different attribute levels and conduct the second-stage questionnaire survey afterwards. In this stage, the survey is to discuss how much importance that consumers place on attribute of wedding dress¬ and find out the preference of students, segmentation variables as well as individual consumer for combinations of wedding dress products in order to be the reference for marketing. The study concludes that the students (or newly-weds), in general, are sensitive to the price of the wedding dress. This result suggests that the price of wedding dress primarily determines the consumers’ preference. Also, the design, color, and level of comfort come in the second to be the considerations for wedding dress. Hence, when carrying out the service of co-design, we should readjust the price appropriately in terms of the targeted consumer groups. As for the design, color, and customized trimming, we should also aim at diverse consumers’ demands and provide consumers with more options. Finally, by applying the above adjustments, the dealer will be able to create the wedding dress fitting in with personal style in order to achieve the mutual benefit of dealers and consumers. |
第三語言摘要 | |
論文目次 |
目錄 第一章 緒論 1 第一節 研究背景與動機 1 第二節 研究目的 3 第三節 研究範圍 3 第四節 研究流程 4 第五節 論文架構 4 第二章 文獻探討 6 第一節 婚紗業市場探討 6 第二節 婚紗禮服之產品屬性 10 第三節 共同設計 14 第四節 聯合分析 16 第三章 研究架構與研究方法 29 第一節 研究架構 29 第二節 研究設計 29 第三節 資料分析方法 39 第四章 實證分析 48 第一節 整體資料回收情況 48 第二節 影響消費者選擇婚紗禮服之重要屬性調查 49 第三節 消費者對於婚紗禮服之選擇偏好調查 63 第五章 結論與建議 93 第一節 研究結論 93 第二節 管理意涵與建議 96 第三節 研究限制與後續研究 97 參考文獻 99 附錄 105 圖目錄 圖1-1研究流程圖 5 圖2-1結婚平均年齡 7 圖2-2影響區隔策略的因素 8 圖2-3台灣地區16-40歲未婚女性的理想婚紗類型統計 9 圖2-4產品的三個層次 10 圖2-5 Mary Lynn Damhorst(1989)所訂定之模型 11 圖2-6聯合分析之分析流程圖 20 圖2-7三種偏好模式之比較 21 圖2-8整體輪廓法之受測體範例 23 圖2-9成對比較法之受測體範例 24 圖3-1本研究之分析架構圖 29 圖4-1結婚需要(希望)哪些項目或儀式之長條圖 51 圖4-2尋找婚紗店的主要管道之長條圖 51 圖4-3拍攝婚紗照所需要預算之長條圖 52 圖4-4結婚需要宴客桌數之長條圖 53 圖4-5結婚宴客方式之長條圖 53 圖4-6宴客「一桌」預算之長條圖 54 圖4-7蜜月旅行地點分佈之長條圖 55 圖4-8蜜月旅行預算分佈之長條圖 55 圖4-9婚紗禮服受測體之範例 65 圖4-10學生族群對婚紗產品之購買與租賃意願所注重產品差異之長條圖 74 圖4-11個別受測者對於婚紗產品購買意願所注重屬性程度差異之長條圖 84 圖4-12個別受測者對於婚紗產品租賃意願所注重屬性程度差異之長條圖 87 表目錄 表2-1婚紗分類整理 13 表2-2共同設計之定義彙整 15 表2-3聯合分析發展歷程 17 表2-4兌換法之受測體範例 22 表2-5受測體展示方式之優缺點比較 26 表2-6衡量尺度分類之優缺點比較 26 表3-1業者訪談背景資料 30 表3-2消費者選擇婚紗店之重要屬性 31 表3-3業者訪談婚紗禮服屬性彙整表 31 表3-4業者訪談婚紗禮服重要(外顯、內隱)屬性彙整表 32 表3-5消費者訪談婚紗禮服重要屬性彙整表 32 表3-6第一階段問卷內容之結構 34 表3-7第二階段問卷內容之結構 34 表3-8信度衡量準則 35 表3-9預試問卷-消費者對於婚紗店之意願部份的項目分析彙整表 35 表3-10預試問卷-消費者對於婚紗照之意願部份的項目分析彙整表 36 表3-11預試問卷-消費者對於婚紗禮服之意願部份的項目分析彙整表 37 表3-12第一階段問卷正式內容之結構 37 表3-13淡江大學三大領域抽樣樣本數 38 表3-14 KMO統計量判斷準則 41 表3-15婚紗禮服產品偏好受測體彙整表 43 表3-16對應婚紗禮服產品的設計矩陣 44 表3-17婚紗禮服產品之成份效用估計值 46 表3-18婚紗禮服產品之屬性重要性 47 表4-1整體資料回收情況 48 表4-2第一階段樣本結構統計表 49 表4-3拍攝婚紗照之消費者預算教育程度與性別之交叉分析表 56 表4-4消費者尋找婚紗店管道與年齡性別之交叉分析表 57 表4-5消費者對於婚紗店之意願部份的項目分析彙整表 58 表4-6消費者對於婚紗照之意願部份的項目分析彙整表 58 表4-7消費者對於婚紗禮服之意願部份的項目分析彙整表 59 表4-8正式問卷與預試問卷之題項 Cronbach's α 值比較 59 表4-9婚紗相關服務之KMO與Bartlett檢定表 60 表4-10消費者選擇婚紗店條件之因素分析 61 表4-11消費者選擇婚紗照條件之因素分析 61 表4-12消費者選擇婚紗禮服條件之因素分析 62 表4-13消費者選擇婚紗禮服之重要屬性評估彙整表 63 表4-14婚紗禮服產品屬性及水準彙整表 64 表4-15共同設計之個人化婚紗禮服之受測體彙整表 65 表4-16第二階段樣本結構統計表 66 表4-17學生受訪者之共同設計婚紗禮服產品模型適合度評估 67 表4-18 Spearman等級相關係數統計表 68 表4-19各領域的實際人數與樣本回收情況 69 表4-20學生族群對婚紗產品購買意願之成份效用值及屬性重要性分析表 70 表4-21學生族群對婚紗產品購買意願之最佳組合彙整表 71 表4-22學生族群對婚紗產品租賃意願之成份效用值及屬性重要性分析表 72 表4-23學生族群對婚紗產品租賃意願之最佳組合彙整表 72 表4-24學生族群對婚紗產品購買意願與租賃意願之最佳組合比較 73 表4-25以月花費區隔變數婚紗產品購買意願屬性重要性成份效用值分析表 75 表4-26以月花費區隔變數之婚紗產品購買意願之最佳組合彙整表 76 表4-27以月花費區隔變數婚紗產品租賃意願屬性重要性成份效用值分析表 77 表4-28以月花費區隔變數之婚紗產品租賃意願之最佳組合彙整表 78 表4-29以認識方式區隔變數婚紗產品購買意願屬性重要性成份效用值分析表 79 表4-30以認識方式區隔變數之婚紗產品購買意願之最佳組合彙整表 80 表4-31以認識方式區隔變數婚紗產品租賃意願屬性重要性成份效用值分析表 81 表4-32以認識方式區隔變數之婚紗產品租賃意願之最佳組合彙整表 82 表4-33四位受訪者之基本資料之比較 83 表4-34個別受訪者對婚紗禮服產品購買意願屬性重要性成份效用值分析表 85 表4-35個別受訪者對婚紗禮服產品購買意願之最佳組合 86 表4-36個別受訪者對婚紗禮服產品租賃意願屬性重要性成份效用值分析表 88 表4-37個別受訪者對婚紗禮服產品租賃意願之最佳組合 89 表4-38個別受訪者對婚紗禮服產品購買與租賃意願之重視屬性比較 89 表4-39婚紗禮服產品購買意願之產品效用值彙整表 91 表4-40婚紗禮服產品租賃意願之產品效用值彙整表 92 |
參考文獻 |
中文部分: [1] 王昭傑(2000)。<消費者對水果醋屬性偏好之研究─聯合分析法之應用>,屏東科技大學農企業管理所碩士論文。 [2] 邱文科(2004)。<台北市婚紗攝影業經營策略之研究>,元智大學管理研究所碩士論文。 [3] 李佩芬(2011)。<應用共同設計在運動鞋產品創新之研究>,淡江大學應用統計學研究所碩士論文。 [4] 林邦傑(1979)。《因素分析及其應用 企業應用技術大全(Ⅱ)》。台北:大世紀出版社。 [5] 洪淑惠(1999)。<袋包織物質感與感覺意象對應關係之研究>,國立交通大學碩士論文。 [6] 徐意涵(2011)。<女性對婚紗攝影消費需求之研究>,朝陽科技大學企業管理所碩士論文。 [7] 曹秀如(2004)。<從儀式觀點脈絡化婚紗照拍攝行動>,國立清華大學人類學研究所碩士論文。 [8] 郭威廷(2006)。<消費者行為及顧客滿意度之研究>,國立高雄大學國際高階經營管理碩士在職專班碩士論文。 [9] 張勤昌(2003)。<聯合分析應用於金控後銀行顧客知覺與偏好之研究>,國立成功大學統計學系碩士班碩士論文。 [10] 張文智、衛萬里(2009)。應用聯合分析方法於商標設計之最佳化研究-以羅昇企業設計個案為例。設計學報,第10期,第4卷。 [11] 張幸慈(2008)。<北部地區婚紗攝影消費行為之研究:以臺北縣、臺北市、桃園縣為例>,中國文化大學生活應用科學研究所碩士在職專班碩士論文。 [12] 陳順宇(2005)。《多變量分析》。台北市:華泰文化。 [13] 陳慧婷(2002)。<把生活做成生意2 記錄精彩人生 婚紗攝影>。《天下雜誌》。 [14] 藍珮禎(2006)。<消費者對婚紗攝影之研究-以女性角色及攝影形式為例>,龍華科技大學商學與管理研究所碩士論文。 [15] 方世榮 譯(1995)。《行銷學原理》。台北:東華。 [16] 柏宝(2005)。《結婚完全指南》。台北:柏宝科技編輯。 [17] 周文賢、張欽富(2000)。《聯合分析在產品設計之運用》。台北:華泰文化。 [18] 周文賢(2002)。《多變量統計分析SAS/STAT使用方法》。臺北市:智勝出版。 [19] 李宏偉 譯(1997)。《服裝社會心理學》。台北:商鼎文化出版社。 [20] 金凌、高姝月、潘靜中 譯(2000)。《服飾行銷學》。台北:商鼎文化出版社。 [21] 黃俊英(2000)。《多變量分析》。台北:華泰書局。 [22] 顏月珠(2007)。《無母數統計方法》。台大法律學院圖書文具部。 英文部分: [1] Anderson-Connell, L. J., Ulrich, P. V., & Brannon, E. L. (2002). A consumer-driven model for mass customization in the apparel market. Journal of Fashion Marketing and Management, 6(3), 240-258. [2] Balarin, F. (1997). Hardware-software co-design of embedded systems: The POLIS approach, Springer Netherlands. [3] Berger, C., & Piller, F. (2003). Customers as co-designers. Manufacturing Engineer London, 82(4), 42-45. [4] Bernués, A., Olaizola, A., & Corcoran, K. (2003). Extrinsic attributes of red meat as indicators of quality in europe: An application for market segmentation. Food Quality and Preference, 14(4), 265-276. [5] Bock, C., Zha, X. F., Suh, H. W., & Lee, J. H. (2009). Ontological product modeling for collaborative design. National Institute of Standards and Technology, (7643). [6] Chin, K. S., Tang, D. W., Yang, J. B., Wong, S. Y., & Wang, H. (2009). Assessing new product development project risk by bayesian network with a systematic probability generation methodology. Expert Systems with Applications, 36(6), 9879-9890. [7] Clark, K. B. (1989). Project scope and project performance: The effect of parts strategy and supplier involvement on product development. Management Science, 35(10), 1247-1263. [8] Clark, K. B., & Fujimoto, T. (1991). Product development performance: Strategy, organization, and management in the world auto industry. Boston: Harvard Business School Press. [9] Cusumano, M. A., & Takeishi, A. (1991). Supplier relations and management: A survey of japanese, japanese-transplant, and US auto plants. Strategic Management Journal, 12(8), 563-588. [10] Dyer, J. H. (1996). How chrysler created an american keiretsu. Harvard Business Review, 74, 42-60. [11] Filho, D. G., & Kaminski, P. C. (2009). Co-design–from an automaker perspective. International Journal of Product Development, 8(3), 333-353. [12] Fiore, A. M., Lee, S. E., Kunz, G., & Campbell, J. (2001). Relationships between optimum stimulation level and willingness to use mass customisation options. Journal of Fashion Marketing and Management, 5(2), 99-107. [13] Fiore, A. M., Lee, S. E., & Kunz, G. (2004). Individual differences, motivations, and willingness to use a mass customization option for fashion products. European Journal of Marketing, 38(7), 835-849. [14] Green, P.E., & Srinivasan, V. (1978). Conjoint analysis in consumer research: Issues and outlook. Journal of Consumer Research, 5(2). 103-123. [15] Gruner, K. E., & Homburg, C. (2000). Does customer interaction enhance new product success? Journal of Business Research, 49(1), 1-14. Hair, J.F., Black, W.C., Babin, B. J., & Anderson, R. E.(2010). Upper Saddle River, New Jersey: Prentice-Hall International. Multivariate Data analysis, 7th ed. [16] Helander, M., & Khalid, H. (1999). Customer needs in web-based do-it-yourself product design. Proceedings of the 10th Anniversary of M. Sc. Ergonomics International Conference, Lulea, Sweden, 9-14. [17] Helper, S. (1991). Strategy and irreversibility in supplier relations: The case of the US automobile industry. The Business History Review, 65(4), 781-824. [18] Huang, C. L., & Fu, J. (1993). Consumer preferences and evaluations of a processed meat product. Journal of Food Distribution Research, 24(1), 149-157. [19] Kaiser, H. F. & J. Rice(1974). Little Jiffy Mark IV. Educational and Psychological Measurement, 34(Spring),111-117. [20] Kefgen, M. & Touchie-Specht, P. (1986). “Individuality in Clothing Selection and Personal Appearance: A Guide for the Consumer”, Prentice Hall. [21] Liao, C. S., & Lee, C. W. (2010). The application of codesign in new bra product innovations. International Journal of Clothing Science and Technology, 22(2/3), 221-227. [22] Littler, D., Leverick, F., & Bruce, M. (1995). Factors affecting the process of collaborative product development: A study of UK manufacturers of information and communications technology products. Journal of Product Innovation Management, 12(1), 16-32. [23] Mahajan, V., Green, P. E., & Goldberg, S. M. (1982). A conjoint model for measuring self-and cross-price/demand relationships. Journal of Marketing Research, 19(3), 334-342. [24] McCarthy, E. J. (1981), Basic Marketing: A Managerial Approach, 7th ed. Homewood, IL:Irwin, Inc. [25] Miller, D. (1988). Relating porter's business strategies to environment and structure: Analysis and performance implications. Academy of Management Journal, 31(2), 280-308. [26] Milgrom, P., &Roberts, J. (1990). The economics of modern manufacturing: Technology, strategy, and organization. American Economic Review, 80(3), 511-528. [27] North, E. J., De Vos, R. B., & Kotze, T. (2010). The importance of apparel product attributes for female buyers. Joutnal of Family Ecology and Consumer Sciences, 31,41-51. [28] Northen, J. R. (2000). Quality attributes and quality cues effective communication in the UK meat supply chain. British Food Journal, 102(3), 230-245. [29] Ogawa, S., & Piller, F. T. (2006). Reducing the risks of new product development. MIT Sloan Management Review, 47(2), 65-71. [30] Petersen, K. J., Handfield, R. B., & Ragatz, G. L. (2003). A model of supplier integration into new product development*. Journal of Product Innovation Management, 20(4), 284-299. [31] Piller, F., Schubert, P., Koch, M., & Möslein, K. (2005). Overcoming mass confusion: Collaborative customer co-design in online communities. Journal of Computer-Mediated Communication, 10(4). [32] Ramaswamy, V. (2008). Co-creating value through customers' experiences: The nike case. Strategy & Leadership, 36(5), 9-14. [33] Ramirez, R. (1999). Value co-production: Intellectual origins and implications for practice and research. Strategic Management Journal, 20(1), 49-65. [34] Roach, M.E. and Musa, K.E. (1980). New perspectives on the history of Western dress. New York: Nutri-Guides. [35] Sorenson, D., & Bogue, J. (2005). A conjoint-based approach to concept optimisation: Probiotic beverages. British Food Journal, 107(11), 870-883. [36] Srinvasan, V. and Shocker, A. D.,Linear programming techniques for multidimensional analysis of preference. Psychometrika, Vol. 38, No. 3, 1973, pp.337-369. [37] Steenkamp, J. B. E. M. (1989). Product quality: An investigation into the concept and how it is perceived by consumers. The Netherlands: Van Gorcum, Assen. [38] Stochetti, A., & Volpato, G. (2001). Integrating the automotive supply chain managing information flows in supplier–customer relationships: Issues, methods and emerging problems. Cockeas Meeting, 4–5. [39] Sturgeon, T. J., Memedovic, O., Van Biesebroeck, J., & Gereffi, G. (2009). Globalisation of the automotive industry: Main features and trends. International Journal of Technological Learning, Innovation and Development, 2(1), 7-24. [40] Szykman, S., Fenves, S. J., Keirouz, W., & Shooter, S. B. (2001). A foundation for interoperability in next-generation product development systems. Computer Aided Design, 33(7), 545-559. [41] Tseng, M. M., & Du, X. (1998). Design by consumer for mass customization products. CIPR Annals-Manufacturing Technology, 47(1), 103-106. [42] Turnbull, P., Oliver, N., & Wilkinson, B. (1992). Buyer-supplier relations in the UK-automotive industry : Strategic implications of the japanese manufacturing model. Strategic Management Journal, 13(2), 159-168. [43] Ulrich, P. V., Anderson-Connell, L. J., & Wu, W. (2003). Consumer co-design of apparel for mass customization. Journal of Fashion Marketing and Management, 7(4), 398-412. [44] Von Hippel, E. (1998). Economics of product development by users: The impact of " sticky" local information. Management Science, 44(5), 629-644. [45] Yoo, D., Zimmerman, J., Steinfeld, A., & Tomasic, A. (2010). Understanding the space for co-design in riders' interactions with a transit service. International Conference on Human Factors in Computing Systems, 1797-1806. 網路部分: [1] 內政部戶政司全球資訊網(2012) http://www.ris.gov.tw/zh_TW/37 [2] 中華民國統計資訊網(2012) http://ebas1.ebas.gov.tw/pxweb/Dialog/statfile9L.asp [3] UrStyle婚享主義(2012) http://www.urstyle.com.tw/ [4] 維基百科(2012) http://zh.wikipedia.org/zh-tw/Wikipedia:%E9%A6%96%E9%A1%B5 |
論文全文使用權限 |
如有問題,歡迎洽詢!
圖書館數位資訊組 (02)2621-5656 轉 2487 或 來信