淡江大學覺生紀念圖書館 (TKU Library)
進階搜尋


下載電子全文限經由淡江IP使用) 
系統識別號 U0002-1806201015355200
中文論文名稱 綠色供應鏈中引入RFID技術之決策模型
英文論文名稱 A Decision Model for Introducing RFID Systems into Green Supply Chain
校院名稱 淡江大學
系所名稱(中) 資訊管理學系碩士班
系所名稱(英) Department of Information Management
學年度 98
學期 2
出版年 99
研究生中文姓名 尹亮
研究生英文姓名 Liang Yin
學號 697631678
學位類別 碩士
語文別 英文
口試日期 2010-05-29
論文頁數 41頁
口試委員 指導教授-徐煥智
委員-伍台國
委員-吳瑞堯
委員-徐煥智
委員-劉艾華
中文關鍵字 綠色供應鏈  RFID  決策模型 
英文關鍵字 green supply chain  RFID  decision making  costs evaluation model 
學科別分類 學科別社會科學管理學
學科別社會科學資訊科學
中文摘要 近年來,環境問題的重要性被製造商不斷重申與強調,而綠色供應鏈的概念也和閉環式的產品生命週期設計一起被提出,以進一步加強供應連的綠色環保性.與此同時,無線射頻識別技術在綠色供應鏈各環節上的應用可以在產品由生產階段向回收階段移動的過程中助其取得更佳的可見性.儘管如此,由於無線射頻識別技術高昂的建置費用,許多爭議依舊存在.因此,此篇研究將針對是否應在綠色供應鏈中採用無線射頻識別技術提出一個有效的模型,來評估與產品信息相關的成本.此研究涉及到的供應鏈環節包括生產廠商,銷售商家與回收中心.總的來說,本模型可幫助決策者在將信息相關之成本最小化的前提下,評估是否應在某些產品上採用無線射頻識別技術.
英文摘要 The importance of environmental issues is becoming increasingly emphasized by manufacturers in the recent decades, and the concept of green supply chain has been proposed, along with the closed-loop product lifecycle design, to improve the greenness of the supply chain. Meanwhile, the use of RFID technology on supply chain nodes may help to achieve better product visibility during its movement from the production stage to the recycling stage. However, debates still exist due to the high implementation costs of the RFID systems. Thus, our research sets up a useful model to evaluate information related costs in green supply chain, for whether RFID technology should be implemented. The nodes to be measured include the producer’s factory, the retailer’s shop and the recycler’s center. In summary, our model is able to help decision makers find out whether RFID tagging should be adopted on certain kinds of products, in order to minimize information costs.
論文目次 Chapter I Introduction 1
Chapter II Literature Review 3
Chapter III Decision Model 7
3.1 Structural Presentation of RFID Facilitated GSCM 7
3.2 The Modeling Framework 9
Chapter IV Model Illustration 15
4.1 Incorrect Data Costs 16
4.1.1 Optimized Xi results change with the incorrect data costs 17
4.1.2 Optimized total data costs change with the incorrect data costs 18
4.1.3 Total data costs change with the RFID decision and incorrect data costs 19
4.2 Error Rate 20
4.2.1 Optimized Xi results change with the error rates 20
4.2.2 Optimized total data costs change with the error rates 22
4.2.3 Total data costs change with the RFID decision and error rates 24
4.3 Recycling Rate 26
4.3.1 Optimized Xi results change with the recycling rates 26
4.3.2 Optimized total data costs change with the recycling rates 27
4.3.3 Total data costs change with the RFID decision and recycling rates 28
4.4 Recycling Cost 29
4.4.1 Optimized Xi results change with the recycling costs 29
4.4.2 Optimized total data costs change with the recycling costs 31
4.4.3 Total data costs change with the RFID decision and recycling costs 33
Chapter V Conclusion 36
References 38

List of Tables

Table III 1 Variables used in this model 11
Table IV 1 Decision and costs results in initial scenario 16
Table IV 2 Incorrect data scenario illustration - Xi 18
Table IV 3 Error rate scenario illustration – Er – Xi 21
Table IV 4 Error rate scenario illustration – Eb – Xi 22
Table IV 5 Recycling rate scenario illustration –Xi 27
Table IV 6 Recycling cost with RFID scenario illustration – Xi 30
Table IV 7 Recycling cost without RFID scenario illustration – Xi 31

List of Figures

Figure IV 1 Incorrect data scenario illustration – total data costs 19
Figure IV 2 Total data costs trend with IDC and Xi 20
Figure IV 3 Error rate scenario illustration - Er - total costs 23
Figure IV 4 Error rate scenario illustration - Eb - total costs 24
Figure IV 5 Total data costs trend with Er and Xi 25
Figure IV 6 Total data costs trend with Eb and Xi 26
Figure IV 7 Recycling rate scenario illustration - total costs 28
Figure IV 8 Total data costs trend with recycling rate and Xi 29
Figure IV 9 Recycling cost with RFID scenario illustration – total data costs 32
Figure IV 10 Recycling cost without RFID scenario illustration – total data costs 33
Figure IV 11 Total data costs trend with recycling costs with RFID and Xi 34
Figure IV 12 Total data costs trend with recycling costs without RFID and Xi 35

參考文獻 Angeles, R., 2005. RFID technologies: supply-chain applications and implementation issues. Information Systems Management 22 (1), 51–65.
Bear, Stearns & Co. Inc., 2003. Supply-chain technology: track(ing) to the future. Equity Research Report. URL /www.bearstearns.com/bscportal/pdfs/research/supplychain/technology_rfid.pdfS.
Birou, L. M., Fawcett, S. E., & Magnon, G. M. (1998). The Product Life Cycle: A Tool for Functional Strategic Alignment. International Journal of Purchasing and Materials, 34 (2), 37-51.
Cooke, J.A., 2005. Slow but steady. Logistics Management, February 1. URL /www.logisticsmgmt.com/archiveS.
Daniels, S., 2000, Management system standards poised for momentum boost. Quality Progress, 33, 31± 39.
Doerr, K.H., Gates, W.R., Mutty, J.E., 2006. A hybrid approach to the valuation of RFID/MEMS technology applied to ordnance inventory. International Journal of Production Economics 103 (2), 726–741.
Duber-Smith, D. C. (2005, August). The Green Imperative. Soap, Perfumery, and Cosmetics, 78 (8), pp. 24-26.
EPCglobal Inc., 2004. The EPCglobal Network and the Global Data Synchronization Network (GDSN). EPCglobal Position Paper. URL:/www.epcglobalinc.org/news/position_papers.htmlS.
FDA (Food and Drug Administration), 2006. FDA Counterfeit Drug Task Force Report: 2006 Update. FDA Counterfeit Drug Task Force, Department of Health and Human Services, FDA, USA, June 8. URL: /www.fda.gov/oc/initiatives/counterfeit/report6_06.pdfS.
Hou, J.L., Huang, C.H., 2006. Quantitative performance evaluation of RFID applications in the supply chain of the printing industry. Industrial Management and Data Systems 106 (1), 96–120.
IPCC (2007-05-04). "Summary for Policymakers" (PDF). Climate Change 2007: The Physical Science Basis. Contribution of Working Group I to the Fourth Assessment Report of the Intergovernmental Panel on Climate Change. http://ipcc-wg1.ucar.edu/wg1/Report/AR4WG1_Print_SPM.pdf. Retrieved 2009-07-03.
Jarugumilli, S., Grasman, S.E., 2007. RFID-enabled inventory routing problems. International Journal of Manufacturing Technology and Management 10 (1), 92–105.
Jogleker, N., Rosenthal, S., 2005. Experimentation with RFID usage in supply chains. POMS Chronicle 12 (1), 10–14.
Kärkkäinen, M., Holmstrom, J., 2002. Wireless product identification: enabler for handling efficiency, customization and information sharing. Supply Chain Management: An International Journal 7 (4), 242–252.
Kumar, S. and P. Malegeant, "Strategic alliance in a closed-loop supply chain, a case of manufacturer and eco-non-profit organization," Technovation, 2006, pp. 1127-1135.
Lee, H., Özer, Ö., 2007. Unlocking the value of RFID. Production and Operations Management 16 (1), 40–64.
Li, S., Visich, J.K., 2006. Radio frequency identification: supply chain impact and implementation challenges. International Journal of Integrated Supply Management 2 (4), 407–424.
Ngai, E. W. T., Cheng, T. C. E., Au, S., & Lai, K. H. (2005). Mobile commerce integrated with RFID technology in a container depot. Decision Support System, 43(1), 62–76.
Oliver, R.K., Webber, M.D., 1982, “Supply-chain management: logistics catches up with strategy”, Outlook, Booz, Allen and Hamilton Inc. Reprinted 1992, in Logistics: The Strategic Issues, ed. M Christopher, Chapman Hall, London, pp. 63-75.
Parlikad, K.A., McFarlane, D., 2007. RFID-based product information in end-of-life decision making. Control Engineering Practice 15, 1348-1363.
Plambeck, E. L. (2007, July). The Greening of Wal-Mart's Supply Chain. Supply Chain Management Review, 11 (5), p. 18.
Prater, E., Frazier, G.V., Reyes, P.M., 2005. Future impacts of RFID on e-supply chains in grocery retailing. Supply Chain Management: An International Journal 10 (2), 134–142.
Preuss, L. (2001). In Dirty Chains? Purchasing and Greener Manufacturing. Journal of Business Ethics, 34, 345-359.
PRTM. Scor model [EB/OL]. http://www.supplychain, org/html/scor-overview.cfn. 2000-05-15.
Quinn, F.J., 2005. Setting the standards: an interview with Mike Meranda. Supply Chain Management Review, October. URL: /www.manufacturing.net/scm/index.asp?layout=siteInfoWebzineandview=Detailanddoc_id=42385S.
Quirk, R.E., Borrello, S.J., 2005. RFID: rapid deployment and regulatory challenges. Venable LLP White Paper. URL: /www.venable.com/publications.cfmS.
Raman, A., DeHoratius, N., Zeynep, T., 2001. Execution: the missing link in retail operations. California Management Review 43 (3), 136–152.
Rutner, S., Waller, M.A., Mentzer, J.T., 2004. A practical look at RFID. Supply Chain Management Review, January/February. URL: /www.manufacturing.net/scm/index.asp?layout=siteInfoWebzineandview=Detailanddoc_id=42385S.
Sheffi, Y., 2004. RFID and innovation cycle. International Journal of Logistics Management 15 (1), 1–10.
Sheu, J., B. ; Chou, Y., H., & Hu, C.-C. (2005). An Integrated Logistics Operational Model for Green-Supply Chain Management. Transportation Research, 41, 287-313.
Srivastara, S. K. (2007). Green Supply-Chain Management: A State-of-The-Art Literature Review. International Journal of Management Reviews, 9 (1), 53-80.
Stonebraker, P. W., & Liao, J. (2006). Supply Chain Integration: Exploring Product and Environmental Coningencies. Supply Chain Management, 11 (1), 34-43.
Taghaboni-Dutta, F., Velthouse, B., 2006. RFID technology is revolutionary: who should be involved in this game of tag? Academy of Management Perspectives 20 (4), 65–78.
Trowbridge, P. (2001). A Case Study of Green Supply-Chain Management at Advanced Micro Devices. Greener Management International, 35, 121-135.
Twist, D.C., 2005. The impact of radio frequency identification on supplychain facilities. Journal of Facility Management 3 (3), 226–239.
Vlavianos-arvanitis, A., "Cleaner production: profit for future generations," Journal of Cleaner Production, 1998, vol.6 pp.381-385.
Wang, S., W., Zhang, L., Liu, Z., F. and Liu, G., F., 2003. Study on the Performance Assessment of Green Supply Chain.
Walton, S. V. (1998). The Green Supply Chain: Integrating Suppliers into Environmental Management Processes. International Journal of Purchasing and Materials, 34 (2), 2-11.
Wyld, D.C., 2006. RFID 101: the next big thing for management. Management Research News 29 (4), 154–173.
Zebra Technologies, 2004. RFID: the next generation of AIDC. Zebra Technologies White Paper. URL: /www.integratedlabeling.com/rfid/white_papers/11315Lr2RFIDTechnology.pdfS.
論文使用權限
  • 同意紙本無償授權給館內讀者為學術之目的重製使用,於2010-06-24公開。
  • 同意授權瀏覽/列印電子全文服務,於2010-06-24起公開。


  • 若您有任何疑問,請與我們聯絡!
    圖書館: 請來電 (02)2621-5656 轉 2281 或 來信