§ 瀏覽學位論文書目資料
  
系統識別號 U0002-1606200615410400
DOI 10.6846/TKU.2006.00434
論文名稱(中文) 台灣地區預拌混凝土廠採用供應鏈管理系統影響因素之研究
論文名稱(英文) An Empirical Study on Factors Affecting Supply Chain Management Adoption on Ready-Mixed Concrete in Taiwan.
第三語言論文名稱
校院名稱 淡江大學
系所名稱(中文) 企業管理學系碩士在職專班
系所名稱(英文) Department of Business Administration
外國學位學校名稱
外國學位學院名稱
外國學位研究所名稱
學年度 94
學期 2
出版年 95
研究生(中文) 簡振旺
研究生(英文) Cheng-Wang Chien
學號 793450148
學位類別 碩士
語言別 繁體中文
第二語言別
口試日期 2006-06-20
論文頁數 86頁
口試委員 指導教授 - 吳坤山(kunshan@mail.tku.edu.tw)
委員 - 莊忠柱
委員 - 羅惠瓊
委員 - 吳坤山
關鍵字(中) 供應鏈管理
創新擴散理論
預拌混凝土
關鍵字(英) Supply Chain Management
Innovation Diffusion Theory
Ready-Mixed Concrete
第三語言關鍵字
學科別分類
中文摘要
本論文主要目的是探討目前台灣地區預拌混凝土廠供應鏈管理系統採用的現況且提出一研究模式,希望可利用此研究模式來預測及解釋預拌混凝土廠採用供應鏈管理系統之意向的因素,並驗證研究模式的預測及解釋能力,而主要的研究問題是探討組織特性、環境特性以及創新科技特性等構面之因素是否會影響預拌混凝土廠對供應鏈管理系統的採用。
  本研究以台灣地區預拌混凝土廠為研究母體,深入探索預拌混凝土廠採用供應鏈管理系統之重要影響因素,本研究針對台灣地區預拌混凝土廠共203家進行問卷調查,經過六週的問卷回收,共回收123份,回收率60.59%。剔除因填答不完整之42份無效問卷,共有實際有效問卷81份,故有效問卷回收率為40%。
研究顯示,在組織特性構面中「高階主管支持」及「正式化程度」因素跟預拌混凝土廠是否採用供應鏈管理系統並沒有顯著的相關性。環境特性構面中「企業競爭壓力」及「政府與公會政策」因素跟預拌混凝土廠是否採用供應鏈管理系統有顯著的相關性,「資料整合需求」因素上並沒有明顯的與採用供應鏈管理系統有顯著的關係。在創新科技特性構面中「成本」因素跟預拌混凝土廠是否採用供應鏈管理系統有顯著的相關性,而「相對利益」及「相容性」等因素上並沒有明顯的與採用供應鏈管理系統有顯著的關係。
英文摘要
The purpose of this thesis is to explore the adoption of a Supply Chain Management (SCM) system, currently used in Taiwan Ready-Mixed Concrete (RMC) industry, and then to explain the reason why and why not those companies’ use of SCM system. After implementing the questionnaire survey, this research also verifies the model’s ability on forecasting and clarification. The major influencing factors of enterprise adopting such SCM system are in aspects of organization, environment, and innovation technology characteristics. The sample included a total of 203 RMC manufactories. After six-week survey period, 123 completed questionnaires were collected. The response rate approximates 60.59%. There are 81 effective questionnaires cases, excluding 42 non-effective questionnaires answered incompletely. The ratio of valid questionnaires is 40%.

  The results show that in the organization characteristics dimension, “Sensior manager supporting” and “Formalization of organization” are not correlated with whether RMC will adopt SCM system or not. In environment characteristics, “Enterprise competition pressure “ and “Government and council policy” are highly correlated with whether RMC will adopt SCM system or not. However, “The need of data integration” is not. In innovation technology, “Cost” is highly correlated with whether RMC will adopt SCM system or not. However, “Relative advantage” and “Compatibility” are not.
第三語言摘要
論文目次
第一章 緒  論	1
第一節 研究背景與動機	1
第二節 研究目的	2
第三節 研究問題	2
第四節 研究流程	3
第五節 論文架構	5
第二章 台灣地區預拌混凝土廠發展現況	7
第一節 我國預拌混凝土產業之探討與發展過程	7
第二節 預拌混凝土產業範圍與特性	12
第三節 預拌混凝土產業之發展現況與障礙	16
第三章 文獻探討	22
第一節 供應鏈管理相關概念	22
第二節 影響企業採用創新科技的決策因素	27
第四章 研究方法	35
第一節 研究架構	35
第二節 研究設計	36
第三節 研究假設	36
第四節 問卷設計	37
第五節 資料分析方法	40
第六節 信度與效度檢定	42
第五章 資料分析	44
第一節 基本資料分析	44
第二節 項目分析、因素分析及問卷信度與效度	48
第三節 研究分析	53
第四節 研究假設驗證	59
第六章 結論與建議	60
第一節 研究結果與討論	60
第二節 研究建議	61
第三節 研究限制	62
第四節 後續研究建議	63
參考文獻	64
附錄A-問卷設計	72
附錄B-問項顯著性分析	77
附錄C.1-組織特性構面因素分析	78
附錄C.2-環境特性構面因素分析	79
附錄C.3-創新科技特性構面因素分析	80
附錄D.1-公司成立年限ANOVA及Kruskal-Wallis檢定統計量	81
附錄D.2-公司員工人數ANOVA及Kruskal-Wallis檢定統計量	82
附錄D.3-公司資本總額ANOVA及Kruskal-Wallis檢定統計量	83
附錄D.4-公司年營業額ANOVA及Kruskal-Wallis檢定統計量	84
附錄E-八個因素構面的 Pearson相關係數表	85
附錄F-羅吉斯迴歸分析表	86
圖目錄
圖1-1 研究流程圖...............................................................................................................4
圖2-1 預拌混凝土生產、運輸及施工流程圖..............................................................13
圖2-2 預拌混凝土拌和生產示意圖................................................................................13
圖2-3 營建體系上中下游結構關係圖...........................................................................14
圖2-4 預拌混凝土產業價值鏈與相關政府機關權責關係圖.....................................15
圖3-1 供應鏈流程圖.........................................................................................................23
圖3-2 供應鏈決策制訂架構圖........................................................................................26
圖4-1 本研究概念性架構圖............................................................................................35
表目錄
表3-1 供應鏈管理定義彙整表........................................................................................23
表3-2 創新採用與否的要素.............................................................................................28
表4-1 預拌混凝土產業基本特性的操作型定義...........................................................37
表4-2 構面、問卷題目及相關文獻一覽表...................................................................38
表5-1-1 公司成立年限統計表.........................................................................................45
表5-1-2 公司員工人數統計表.........................................................................................45
表5-1-3 公司資本總額統計表.........................................................................................46
表5-1-4 公司年營業額統計表.........................................................................................46
表5-1-5 供應鏈管理系統採用狀況統計表....................................................................47
表5-2-1 Bartlett(球形考驗)及 KMO(取樣適切性量數)表..............................49
表5-2-2 「組織特性」構面之因素分析........................................................................50
表5-2-3 「環境特性」構面之因素分析........................................................................50
表5-2-4 「創新科技特性」構面之因素分析................................................................51
表5-2-5 信度分析...............................................................................................................52
表5-3-1 Kolmogorov-Smirnov (K-S)檢定表...................................................................54
表5-3-2 變異數相等性檢定表.........................................................................................54
表5-3-3 公司成立年限對各變數之變異數分析及Kruskal-Wallis檢定統計量..........55
表5-3-4 公司員工人數對各變數之變異數分析及Kruskal-Wallis檢定統計量..........56
表5-3-5 公司資本總額對各變數之變異數分析及Kruskal-Wallis檢定統計量..........56
表5-3-6 公司年營業額對各變數之變異數分析及Kruskal-Wallis檢定統計量..........57
表5-3-7 Hosmer與Lemeshow檢定表..............................................................................58
表5-3-8 分類預測表..........................................................................................................58
表5-3-9 羅吉斯迴歸分析表..............................................................................................59
參考文獻
參考文獻
一、中文部分
1.王振滄(2004) 。走過台灣混凝土卅年之回顧與展望,營建知訊,臺灣營建研究院,第261期,頁14~23。
2.方國定、吳智鴻(1998)。影響企業WWW擴散程度之因素探討:以連鎖業為例,管理與資訊學報,第3期,頁97~126。
3.台灣區預拌混凝土工業同業公會網址。2005年12月2日,取自
http//rmc@industry.org.tw。 
4.李正綱、謝文恭(1995)。影響企業採用EDI 系統因素之研究-以汽車產業中衛體系EDI 為例,第六屆國際資訊管理學術研討會論文集,頁500~507。
5.李珮如(2003)。影響國內中小企業採用企業資源規劃系統之關鍵因素,國立中正大學資訊管理研究所碩士論文,未出版。
6.江仁德(2001)。家電製造業導入供應鏈管理關鍵成功因素之研究,國立成功大學工業管理研究所碩士論文,未出版。
7.沈永年、鍾文豪、孫德和(2003)。台灣地區2003年至2009年預拌混凝土需求量調查研究,國立高雄應用科技大學,土木工程與防災科技研究所調查報告。
8.沈思玲(2003)。台灣地區藥廠導入供應鏈管理關鍵因素之研究,國立中正大學資訊管理研究所碩士論文,未出版。
9.林世強、張光甫 (2000)。國內預拌混凝土業困境與突破,營建知訊,臺灣營建研究院,205期,頁25~30。
10.林文仲(2000)。我國人造纖維紡織業導入供應鏈管理關鍵成功關鍵因素之研究,國立台北科技大學商業自動化與管理研究所碩士論文,未出版。
11.林秀津譯 (2004)。管理思想如何改變世界(譯自:Des Dearlove,“The ultimate book of business thinking:harnessing the power of the world’s greatest business ideas.”),商周出版社,頁353。
12.姜善鑫、陳明健、鄭欽龍、范錦明(2004)。經濟地理,台北:三民書局,頁 65~66。
13.侯君溥、林育賢(1996)。中小型零售商導入 POS系統模式之研究,第七屆國際資訊管理學術研討會論文集,頁120~128。
14.郭瑞祥(2005)。供應鏈管理,經理人月刊,第4號:頁130~135。
15.徐敏晃、張俊鴻 (2005)。打響品牌 混凝土業有藍天,營建知訊,臺灣營建研究院,268期,頁26。
16.陳式毅、黃兆龍、湛淵源(1992)。預拌混凝土廠品質認證制度之研究,預拌混凝土品管與認證研討會,頁40~86。
17.陳振川、張光甫、林世強(2000)。全面混凝土品質提昇制度之推動,中國木水利學會工程學刊,第11卷第一期,頁23~33。
18.陳繼禹(1993)。預拌水泥混凝土品質管制之研究,國立中央大學土木工程研究所碩士論文,頁12~14。
19.黃正翰( 2005 )。混凝土產業經營變奏曲,營建知訊,臺灣營建研究院,268期,頁15~16。
20.黃君雄( 2005 )。台灣區預拌混凝土工業同業公會會刊,第16期,頁16~20。
21.黃興進、洪萬富、洪銘建、沈思玲 ( 2004 ) 。 影響臺灣地區製藥廠採用供應鏈管理之關鍵因素,資訊管理展望,6(1),頁1~20。
22.黃俊英(1994)。企業研究方法,台北:華泰文化事業公司。
23.黃俊英(1998)。多變量分析,台北:華泰文化事業公司。
24.董水湧、金天倫 ( 2003 ) 。台灣區預拌混凝土工業同業公會會刊,第14期,頁6~17。
25.傅亙平 ( 2003)。建構IC 設計產業之供應鏈管理模式,中原大學工業工程學系碩士班碩士論文,未出版。
26.楊浩二、彭勝正(1997)。企業應用網際網路的決策因素之研究:以台北地區出版業為例,大同學報,27 卷,頁31~44。
27.葉桂珍、王健全、黃吉村(2002)。台灣廠商導入電子商務之影響因素及導入後績效變化初探,臺灣管理學刊,第1 卷第2 期,頁357~380。
28.張倩瑜、王明德 (2005)。期學習型產業政策引領業界衝刺,營建知訊,臺灣營建研究院,268期,頁4。
29.張景堂(1996)。統計分析:SPSS for Windows,台北:儒林圖書。
30.張紹勳、林秀娟(1995)。SPSS for Windows 統計分析:初等統計與高等統計,台北:松崗圖書。
31.張有恆(2005)。現代物流管理,台北:華泰文化事業公司,頁54。
32.鄭百成(2003)。預拌混凝土拌合廠品質管理電子化系統建構與研究,國立中央大學土木工程研究所碩士論文,頁9~14。
33.蔡宏明譯(2004)。從供應鏈看管理(譯自:Michael Hugos ,“Essential of supply chain management .”),台北:梅霖文化,頁12~13。
34.龔高輝 (2002)。運用供應鏈管理系統機制提升國內代工型態資訊產業競爭優勢之研究,國立中山大學資訊管理研究所碩士在職專班碩士論文,頁21。

二、英文部分
1.Anderson, J. C., Gerbing, D. W. (1988). Structural equation modeling in practice: A review and recommended two-steo approach. Psychological Bulletin, 103(3), 411-423.
2.Berry, D., Towill, D. R., and Wadsley N. (1994). Supply chain management in the elecronics product industry. International Journal of Physical Distribution and Logistics Management, 24, 20-32.
3.Chau, P.Y.K., and Tam, K.Y. (1997). Factors affecting the adoption of open systems: An exploratory study. MIS Quarterly. 21, 1-24. 
4.Chin, W. W. and Gopal, A. (1995). Adoption intention in GSS: relative importance of beliefs. Database Advances, 26, 42-63.
5.Choe, Jong-Min (1996). The Relationship among performance of accountinginformation systems, influence factors, and evolution level of information systems. Journal of Management Information Systems, 12, 215-239.
6.Christopher, M. (1992). Logistics and Supply Chain Management, Pitman Publishing.
7.Cohn, S.F. and Turyn, R. M. (1984). Organizational structure, decision-making procedures and the adoption of innovations. IEEE Transactions on Engineering Management. 31, 154-161.
8.Cooper, M. C., and Ellram, L.M. (1993). Characteristics of supply chain management and the implications for purchasing and logistics strategy. The International Journal of Management, 4, 13-24.
9.Cooper, M. C., Lambert, D. M. and Pagh, J. D. (1997). Supply chain management:implementation issues and research opportunities. The International Journal of Logistics Management, 9, 1-19。
10.Crage, P.B. and King M. (1993). Small-Firm computing: motivators and nhibitors. MIS Quarterly, 17, 47-60.
11.Damanpour, F. (1991). Organizational innovation: A meta-analysis of effects of determinants and moderators. Academy of Management Journal, 34, 555-590.
12.Eder, L. B., and Igbaria, M. (2001). Determinants of intranet diffusion and infusion. Omega, 29, 233-242.
13.Ellram, L.M. (1991). Supply chain management. International Journal of Physical Distribution and Logistics Management, 21, 13-33.
14.Gatignon, Hubert and Roberson, Thomas S. (1989). Technology Diffusion an Empirical Test of Competitive Effects. Journal of Marketing, 53, 35-49.
15.Grover, V. (1993). An Empirically derived model for the adoption of customer-based interorganizational systems. Decision Sciences, 24, 603-640.
16.Grover V. and Goslar, M.D. (1993). The Initiation, adoption, and implementation of telecommunication technologies in US organizations. Journal of Management Information Systems, 10, 141-163.
17.Guimaraes, T., Igbaria, M., and Lu, M. (1992). The Determinants of DSS success: an integrated model. Decision Sciences, 23, 409-429.
18.Hair, J.F., Anderson, R.E., Tatham, R. L., and Black, W.C., (1998). Multivariate Data Analysis, Prentice-Hall.
19.Haley, B. J. (1997). Implementing the decision support infrastructure: key success factors in data warehousing. Unpublished Ph.D. Dissertation, University of Georgia.
20.Hanks Steve, Pollack, Martha E., and Cohen, Paul R. (1993). Benchmarks, testbeds, controlled experimenta-tion, and the design of agent architectures. AI Magazine, 14, 17–42.
21.Hannan, M. T. and McDowell, J. M. (1984). Market concentration and diffusion of new technology in banking industry. Review of Economics and Statistic, 66, 686-691.
22.Houliham, J. (1984). Supply Chain Management. Proceedings of the 19th International Technical Conference of the British Production and Inventory Control Society, 101-110.
23.Kaiser, H. F. (1974). An index of factorial simplicity. Psychometrika, 39, 31-36.
24.Kimberly, J. R. and Evanosko, M. (1981). Organizational innovation: the influence of individual, organizational, and contextual factors on hospital adoption of technological and administrative innovations. Academy of Management Journal, 24, 689-713.
25.Kopczak, L.R. (1997). Logistics partnership and supply chain restructuring: survey results from the US computer industry. Production and Operations Management, 6, 226-247.
26.Kwon, T. H., and Zmud, R. W. (1987). Unifying the fragmented models of information systems implementation, Critical Issues in information Systems Research, 227-251.
27.Laudon, K.C. (1998). Management information systems—new approaches to organization & technology. Upper Saddle River, New Jersey, Prentice Hall Inc.
28.Lee, M.K.O. (1998). Internet-based financial EDI: towards a theory of its organizational adoption. Computer Networks and ISDN Systems. 30, 1579-1588.
29.McBridge, N. (1997). Business use of the Internet: Strategic decision or another bandwagon. European Management Journal, 15, 58-67.
30.Mindess, S. and Young, J. F. (1981). Concrete. Prentice-Hall, Englewood Cliff, New York.
31.Nunnally, J. C., 1978,“ Psychometric theory,” Mcgraw –Hill, New York. 
32.Porter, M. and Millar, V. E. (1985). How information gives you competitive advantages. Harvard Business Review, 63, 149-160.
33.Premkumar, G., and Ramamurthy, K. (1995). The role of inter-organizational and organizational factors on the decision mode for adoption of inter-organizational systems. Decision Sciences, 26(3), 303-336.
34.Premkumar, G., Ramamurthy, K., and Nilakanta, S. (1994). Implementation of Electronic Data Interchange. Journal of Management Information system, 11 157-186.
35.Premkumar,G. and  Roberts, M. (1999). Adoption of new information technologies in rural small business. Omega, 27, 467-484.
36.Quinn, F. J. (1998). Building a world-class supply chain. Logistics Management Distribution Report, 32-40.
37.Raymond, L. (1990). Organisational Context and Information Systems Success: a Contingency Approach. Journal of Management Information Systems, 6, 5-20.
38.Rogers, E. M (1983). Diffusion of Innovation. 3rd. ed, New York: The Free Press.
39.Schon, D. A. (1963). Champions for radical new inventions. Harvard Business Review, 41, 77-86.
40.Scott-Morton, M. (1990). The Corporation of the 1990s: Information Technology and Organizational Transformation. New York: Oxford University Press.
41.Tan, K.C., Kannan, V.R., and Handfield, R.B. (1998). Supply chain management: supplier performance and firm performance,” International Journal of Physical Distribution and Materials Management, 64, 2-9.
42.Thong, J. Y. and Yap, C. S. (1995). CEO characteristics, organizational characteristics and information technology adoption in small business. OMEGA, 
23, 429-442.
43.Weill, Peter Olson, and Margrethe H. (1989). Managing Investment in Information Technology: Mini Case Examples and Implications. MIS Quarterly, 3-17.
44.William D. Presutti Jr. (2003). Supply management and e-procurement: creating value added in the supply chain. Industrial Marketing Management, 32, 219-226.
45.Yap, C. S. (1990). Distinguishing characteristics of organizations using computers. Information & Management, 18, 97-107.
46.Yap, C.S., Thong, J. Y. L., and Raman, K. S. (1994). Effect of government incentives on computerization in small business. European Journal of Information Systems, 3, 191-206.
47.Zmud, R.W. (1982). Diffusion of modern software practices: Influence of centralization and formalization. Management Science, 28, 1421-1431.
論文全文使用權限
校內
校內紙本論文立即公開
同意電子論文全文授權校園內公開
校內電子論文立即公開
校外
同意授權
校外電子論文立即公開

如有問題,歡迎洽詢!
圖書館數位資訊組 (02)2621-5656 轉 2487 或 來信