系統識別號 | U0002-1507201318522800 |
---|---|
DOI | 10.6846/TKU.2013.00463 |
論文名稱(中文) | 超音速燃燒衝壓引擎三維內流場分析 |
論文名稱(英文) | Three-dimensional inflow Analysis of a Scramjet engine via DSMC method |
第三語言論文名稱 | |
校院名稱 | 淡江大學 |
系所名稱(中文) | 機械與機電工程學系碩士班 |
系所名稱(英文) | Department of Mechanical and Electro-Mechanical Engineering |
外國學位學校名稱 | |
外國學位學院名稱 | |
外國學位研究所名稱 | |
學年度 | 101 |
學期 | 2 |
出版年 | 102 |
研究生(中文) | 王鎮彥 |
研究生(英文) | Chen-Yen Wang |
學號 | 600371057 |
學位類別 | 碩士 |
語言別 | 繁體中文 |
第二語言別 | |
口試日期 | 2013-06-28 |
論文頁數 | 84頁 |
口試委員 |
指導教授
-
洪祖昌
委員 - 李宗翰 委員 - 潘國隆 |
關鍵字(中) |
超音速衝壓引擎、直接模擬蒙地卡羅、混合效率 |
關鍵字(英) |
Scramjet, DSMC, Mixing Efficiency |
第三語言關鍵字 | |
學科別分類 | |
中文摘要 |
本研究主要目的在利用直接模擬蒙地卡羅法(DSMC),對三維超音速衝壓引擎之內流場與燃料混合效率進行模擬,探討在不同馬赫數及外型下進氣道內部流場之變化,研究結果可觀察到斜震波及正震波的產生,將影響燃燒室氫氣之混合品質。模擬入口流條件為12、15、18馬赫,而外型區分為凹槽與凹槽後方斜率兩種,本研究希望藉由三維之模擬,進而與二維做比較增加準確性,作為爾後主要模擬之有利工具。 |
英文摘要 |
In this study, the direct simulation Monte Carlo method was used in simulating the internal flow field and fuel mixing efficiency of a three-dimensional supersonic combustion ramjet (scramjet) engine to investigate the changes in the internal field of air inlets at varying Mach numbers and for different physical appearances. The study results show that oblique shock waves and normal shock waves affect the mixing quality of hydrogen in the combustion chamber. The simulated air inlet conditions were 12, 15, and 18 Mach. In addition, two types of physical appearances were tested, specifically, concave cavity and rear-ramped concave cavity. By comparing the results obtained from the three-dimensional simulations with extant two-dimensional simulation results, this study endeavors to increase simulation accuracy. These comparative results can then be used as a reference for conducting major simulations in the future. |
第三語言摘要 | |
論文目次 |
目錄 IV 表目錄 VI 圖目錄 VII 符號表 X 第一章 緒論 1 1-1 前言 1 1-2 文獻回顧 2 1-3 紐森數的定義 5 1-4 稀薄氣體的定義( Dilute gas) 7 1-5 波茲曼方程式(Boltzmann equation) 8 第二章 直接蒙地卡羅法 10 2-1 直接模擬蒙地卡羅法 10 2-2 網格設置與時步的計算 12 2-3 流場初始條件 12 2-4 流場邊界條件 13 2-5 氣體分子模型 16 2-5-1 硬球模型(Hard sphere ,HS) 16 2-5-2 可變硬球模型(Variable soft sphere model ,VHS) 16 2-5-3 可變軟球模型(Variable soft sphere model ,VSS) 18 2-5-4 雙原子分子模型 18 第三章 超音速燃燒衝壓引擎 23 3-1 超音速燃燒衝壓引擎概述 23 3-2 超音速燃燒衝壓引擎構造 24 3-3 超音速燃燒衝壓引擎未來的挑戰 25 第四章 結果與討論 26 4-1 三維外型設置 26 4-2 混合效率 27 4-3 兩外型結構下各馬赫數比較 27 4-3-1 三維12、15、18馬赫算例外流場馬赫變化 28 4-3-2 二維與三維不同馬赫數內、外流場比較 28 4-3-3 三維12、15、18馬赫算例外流場壓力變化 29 4-3-4 二維與三維不同馬赫數內流場壓力比較 30 4-3-5 三維12、15、18馬赫算例外流場溫度變化 31 4-3-6 二維與三維不同馬赫數內流場溫度比較 31 4-3-7 二維與三維氫氧粒子分佈之比較 32 4-4 二維與三維混合效率之比較 33 第五章 結論與建議 35 5-1 結論 35 5-2 未來建議與工作 36 參考文獻 37 表目錄 表4-1 自由流條件設置 ................................. 41 表4-2 可變硬球模型基本參數(273K,1atm) ............... 41 圖目錄 圖1-1 X-51 進行無人駕駛飛機圖 ........................... 42 圖2-1 稀薄度與密度之關係圖 ............................. 43 圖2-2 直接模擬蒙地卡羅法流程圖 ......................... 44 圖2-3 粒子與壁面交互做用(鏡面反射邊界) ................. 45 圖2-4 粒子與壁面交互作用(漫反射邊界) ................... 45 圖2-5 分子碰撞面積示意圖 ............................... 46 圖3-1 X-51 無人駕駛飛機圖 ............................... 46 圖3-2 噴射推進系統圖 ................................... 47 圖3-3 超音速燃燒衝壓引擎構造圖 ......................... 47 圖4-1 三維凹槽模型 ..................................... 48 圖4-2 三維凹槽後方斜率模型 ............................. 49 圖4-3 三維凹槽12 馬赫數分佈圖 .......................... 50 圖4-4 三維凹槽斜率12 馬赫數分佈圖 ...................... 51 圖4-5 三維凹槽15 馬赫數分佈圖 .......................... 52 圖4-6 三維凹槽斜率15 馬赫數分佈圖 ...................... 53 圖4-7 三維凹槽18 馬赫數分佈圖 .......................... 54 圖4-8 三維凹槽斜率18 馬赫數分佈圖 ...................... 55 圖4-9 二維與三維凹槽外流場比較圖 ....................... 56 圖 4-10 二維與三維凹槽斜率外流場比較圖 .................. 57 圖4-11 二維與三維凹槽內流場比較圖 ...................... 58 圖4-12 二維與三維凹槽斜率內流場比較圖 .................. 59 圖4-13 三維凹槽12 馬赫數壓力分佈圖 ..................... 60 圖4-14 三維凹槽斜率12 馬赫數壓力分佈圖 ................. 61 圖4-15 三維凹槽15 馬赫數壓力分佈圖 ..................... 62 圖4-16 三維凹槽斜率15 馬赫數壓力分佈圖 ................. 63 圖4-17 三維凹槽18 馬赫數壓力分佈圖 ..................... 64 圖4-18 三維凹槽斜率18 馬赫數壓力分佈圖 ................. 65 圖4-19 二維與三維凹槽內流場壓力比較圖 .................. 66 圖4-20 二維與三維凹槽斜率內流場壓力比較圖 .............. 67 圖4-21 凹槽12MA 中心壓力切面圖 ......................... 68 圖4-22 凹槽斜率12MA 中心壓力切面圖 ..................... 68 圖4-23 凹槽15MA 中心壓力切面圖 ......................... 69 圖4-24 凹槽斜率15MA 中心壓力切面圖 ..................... 69 圖4-25 凹槽18MA 中心壓力切面圖 ......................... 70 圖4-26 凹槽斜率18MA 中心壓力切面圖 ..................... 70 圖4-27 三維凹槽12 馬赫數溫度分佈圖 ..................... 71 圖4-28 三維凹槽斜率12 馬赫數溫度分佈圖 ................. 72 圖4-29 三維凹槽15 馬赫數溫度分佈圖 ..................... 73 圖 4-30 三維凹槽斜率15 馬赫數溫度分佈圖 ................. 74 圖4-31 三維凹槽18 馬赫數溫度分佈圖 ..................... 75 圖4-32 三維凹槽斜率18 馬赫數溫度分佈圖 ................. 76 圖4-33 二維與三維凹槽內流場溫度比較圖 .................. 77 圖4-34 二維與三維凹槽斜率內流場溫度比較圖 .............. 78 圖4-35 凹槽12MA 中心溫度切面圖 ......................... 79 圖4-36 凹槽斜率12MA 中心溫度切面圖 ..................... 79 圖4-37 凹槽15MA 中心溫度切面圖 ......................... 80 圖4-38 凹槽斜率15MA 中心溫度切面圖 ..................... 80 圖4-39 凹槽18MA 中心溫度切面圖 ......................... 81 圖4-40 凹槽斜率18MA 中心溫度切面圖 ..................... 81 圖4-41 凹槽氫氧分佈圖 .................................. 82 圖4-42 凹槽斜率氫氧分佈圖 .............................. 82 圖4-43 凹槽混合效率比較圖 .............................. 83 圖4-44 凹槽混合斜率效率比較圖 .......................... 84 |
參考文獻 |
[1] http://www.airforce-technology.com/projects/x51-wave- rider/ [2] Bird, G. A., “Approach to Translational Equilibrium in a Rigid Sphere Gas,” Phys. Fluids Vol.6, pp. 1518- 1519, 1963. [3] Bird, G. A., “The Velocity Distribution Function Within a Shock Wave, ”Journal of Fluid Mechanics ,Vol.30,pp .479-487,1967. [4] Borgnakke, C., and Larsen, P. S., “Statistical Collision Model for Monte Carlo Simulation of Polyatomic Gas Mixture,” Journal of Computational Physics, Vol. 18, No. 4, pp. 405-420, 1975. [5] Bird, G. A., Molecular Gas Dynamics and The Direct Simulation of Gas Flows, Oxford University Press, 1994. [6] Muntz, E. P., “Rarefied gas dynamics,” Annu. Rev. Fluid Mech. 21, pp. 387-417, 1989. [7] Bird, G. A., “Perception of Numerical Method in Rarefied Gas Dynamics,” AIAA J., Vol. 118, pp. 211- 226,1989. [8] P. J. Lu and K. C. Wu, “On the shock enhancement of confined supersonic mixing flows,” Phys. Fluids, December 1991. [9] P. J. Lu and K. C. Wu, “Numerical investigation on the structure of a confined supersonic mixing layer,” Phys. Fluids, December 1991. [10] 劉陵,張榛,唐明,劉敬華,楊雨新,王興甫, “氫燃料超音速燃燒室實驗研 究”, 航空動力學報, 第6卷, 第3期, 7月, 1991. [11] Kuh-Wen Hwang, “Effect of Fuel Inlet Location on Combustion Characteristics Within Scramjet Dump Combustor,” IAF,1993 . [12] Minucci, M. A. S., Nagamatsu, H. T., and kim, S. C., “Investigation of a 2-D Scramjet Inlet, M∞=8.25 and To=4100K,”AIAA Paper, pp.91-5018,1991 [13] Minucci, M. A. S., and Nagamatsu, H. T., “Investigation of a Two-Dimensional Scramjet Inlet, M∞=8-18 and To =4100K,”Journal of Propulsion and Power, Vol.9, No.1, pp.139-145, 1993. [14] 黃顧文, “超音速衝壓引擎中燃料噴入位置及震波結構對燃燒室特性影響分 析”, 國立中央大學機械系, 桃園, 1994. [15] Chan H. Chung, Suk C. Kim, Kenneth J. De Witt, Henry T. Nagamatsu, “Numerical Analysis of Hypersonic Low- Density Scramjet Inlet Flow,” Journal of Spacecraft and Rockets, Vol.32, No.1 ,pp.60-66, 1995. [16] Emami, S., Trexler, C.A., Auslender, A. H., Weidner, J. P., “Experimental Investigation of Inlet-Combustor Isolators for a Dual-Mode Scramjet at a Mach Number of 4,” NASA Technical Paper 3502, 1995. [17] Cheng, H. K., and Emmanuel, G., “Perspectives on hypersonic non-equilibrium flow,” AIAA J., Vol.33, pp.385-400, 1995. [18] Zuu-Chang Hong and Ming-Shiann Shin, “Shock-Induced mixing enhancement of supersonic Turbulent Reacting”, 46th International Astronautical Congerss, October, 1995. [19] Holland, S. D., "Mach 10 Computational Study of a Three -Dimensional Scramjet Inlet Flow Field", NASA Technical Memorandum 4602, pp. 1-29, 1995. [20] O’Byrne, S., Doolan, M., Olsen, S. R., and Houwing, A. F. P., "Measurement and Imaging of Supersonic Combustion in a Model Scramjet Engine", Shock Waves, Vol. 9, pp. 221-226, 1999. [21] Adela Ben-Yakar, Ronald K. Hanson, “Cavity Flame- Holders for Ignition and Flame Stabilization in Scramjet: An Overview,” Journal of Propulsion and Power, Vol.17, No.4, 2001. [22] J. Philp Drummond, Glenn S Diskin, Andrew D. Cutler, “FULE-AIR MIXING AND COMBUSTION IN SCRAMJETS,”38th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, 2002. [23] Yuan, S. S., Li, G. C., and Wang, Y. F.,"Numerical Simulation of Ramjet Inlet Flow Fields", Journal of Solid Rocket Technology,Vol. 26, No. 4, pp. 30-33, 2003. [24] Ali, M., Sadrul Islam, A. K. M., and Ahmed, S., "Mixing and Flame Holding With Air Injet Configuration in Scramjet Combustor", Int. Comm. Heat Mass Transfer, Vol. 31, No. 8, pp. 1187-1198, 2004. [25] Kyung Moo Kim and Seung Wook Baek and Cho Young Han,“Numerical study on supersonic combustion with cavity-based fuel injection,” International Journal of Heat and Mass Transfer, Vol.47, pp. 271-286. [26] J. Steelant, A. Mark, K. Hannemann and A. D. Gardner, “Comparison of Supersonic Combustion Tests With Shock Tunnels, Fight and CFD” , American Institute of Aeronautics and Astronautics, 2006. [27] 劉登, “概論超音速燃燒推進載具氣動熱力特性與流場數值模擬”, 中山科學 研究院第二研究所, 2007 [28] Francesco Battista, Luigi Cutrone, Stefano Amabile, Giuliano Ranuzzi, “Supersonic Combustion Models Application for Scramjet Engines”, 16th AIAA/DLR/DGLR International Space Planes and Hypersonic System and Technologies Conference, 2009. [29] 林紘緯, “直接模擬蒙地卡羅法於超音速燃燒衝壓引擎之增強內流場混合效率 分析”, 2010. [30] 林建宏, “超音速燃燒衝壓引擎流場之直接模擬蒙地卡羅法模擬探討”, 2009. [31] 陳均彰, “超音速燃燒衝壓引擎混合分析” , 2012. |
論文全文使用權限 |
如有問題,歡迎洽詢!
圖書館數位資訊組 (02)2621-5656 轉 2487 或 來信