系統識別號 | U0002-0609201814254000 |
---|---|
DOI | 10.6846/TKU.2018.00216 |
論文名稱(中文) | 數位相移條紋投影術應用於三維指紋輪廓量測 |
論文名稱(英文) | Three-dimensional fingerprint profilometry using digital phase-shifting fringe projection |
第三語言論文名稱 | |
校院名稱 | 淡江大學 |
系所名稱(中文) | 機械與機電工程學系碩士班 |
系所名稱(英文) | Department of Mechanical and Electro-Mechanical Engineering |
外國學位學校名稱 | |
外國學位學院名稱 | |
外國學位研究所名稱 | |
學年度 | 106 |
學期 | 2 |
出版年 | 107 |
研究生(中文) | 劉諺融 |
研究生(英文) | Yen-Jung Liu |
學號 | 605350148 |
學位類別 | 碩士 |
語言別 | 繁體中文 |
第二語言別 | |
口試日期 | 2018-07-06 |
論文頁數 | 109頁 |
口試委員 |
指導教授
-
劉承揚(cyliu@mail.tku.edu.tw)
委員 - 趙全鋐 委員 - 陳登豪 |
關鍵字(中) |
三維曲面量測 立體顯微術 指紋量測 |
關鍵字(英) |
Three-dimensional surface measurement Stereocopy fingerprint |
第三語言關鍵字 | |
學科別分類 | |
中文摘要 |
本研究成功使用數位相移條紋投影顯微系統,量測三維指紋輪廓,以及使用數位相移條紋投影系統,量測臉部三維輪廓。指紋量測系統部分結合數位攝影機、縮小成像之鏡組、立體顯微鏡及數位投影機。臉部量測使用數位投影機及數位攝影機。本研究使用自行開發之程式,使用黑白、紅黑、綠黑、藍黑相間之餘弦條紋、七步相位移法、路徑獨立之相位展開技術等,分析四種顏色與黑色相間條紋與其在不同週期下,對於指紋的影響,其20pixel條紋的指紋分變率達到0.05微米,並且成功測試七步相移法用於量測臉部表面輪廓及三維曲面。未來將可應用在大量指紋建檔,及臉部辨識,方便協尋失智老人、犯人捕捉等。 |
英文摘要 |
This research applies digital phase-shift fringe projection microscopy system that measures three-dimensional finger print outline, and digital phase-shift fringe projection system. In the hardware section, the system integrated with a CCD camera, image shrink optical lenses, stereo microscope, and digital projector. Moreover, facial recognition is consisted of digital projector and digital camera. This research is also applied self-developed application that is included black-and-white, red-and-black, green-and-black, and blue-and-black cosine fringe pattern structure light, seven-step phase-shifting techniques, and path-independent phase unwrapping techniques.to analyze the effects on finger prints under four-color-and-black stripes. The resolution of those 20-pixel stripes reach 0.05 μm, and technique is successfully tested on measuring surface outline and three-dimensional curved surface which can be applied to establishing finger-printed files and facial recognition to help searching demented elderly and apprehending suspects. |
第三語言摘要 | |
論文目次 |
目錄 誌謝 I 中文摘要 II 英文摘要 III 目錄 IV 圖目錄 VII 表目錄 XII 第1章 緒論 1 1.1 前言 1 1.2 文獻回顧 3 1.3 論文架構 13 第2章 相位移技術原理 14 2.1 相位量測技術 14 2.1.1 相位移技術 14 2.2 結構光理論 17 2.3 數位相位移法 18 2.3.1 七步相移法 19 2.4 相位展開技術 20 2.5 相位高度值換算 23 2.6 參考平面扣除法 25 第3章 相位移量測系統 28 3.1 指紋拍攝之系統架構 28 3.1.1 結構光源 29 3.1.2 攝影機 30 3.1.3 條紋影像縮小鏡組 33 3.2 臉部量測之系統架構 34 3.2.1 影像擷取 35 3.3 多步相位移之運算程式 36 3.4 實驗步驟 37 3.4.1 指紋量測 37 3.4.2 臉部量測 38 第4章 實驗結果 40 4.1.1 紅黑週期0.73mm條紋 40 4.1.2 紅黑週期1.3mm條紋 46 4.1.3 綠黑週期0.73mm條紋 52 4.1.4 綠黑週期1.3mm條紋 58 4.1.5 藍黑週期0.73mm條紋 64 4.1.6 藍黑週期1.3mm條紋 70 4.1.7 黑白週期0.73mm條紋 76 4.1.8 黑白週期1.3mm條紋 82 4.2 指紋壓於0.5mm薄玻璃 88 4.2.1 黑白週期0.73mm條紋 88 4.2.2 黑白週期1.3mm條紋 94 4.3 臉部量測 100 第5章 結論與未來展望 105 5.1 結論 105 5.2 未來展望 105 參考文獻 106 圖目錄 圖 1 1 硬幣表面[31] 4 圖 1 2 數字99三維曲面[31] 5 圖 1 3 相位移干涉光學量測系統示意圖[31] 5 圖 1 4 三維形狀量測系統架構[6] 6 圖 1 5 影像重建3D模型: (a)3D影像上色(b)實際影像[6] 6 圖 1 6 系統架構圖[32] 7 圖 1 7 探針管架構圖[32] 7 圖 1 8 量測直徑8 mm標準圓球: (a)直徑8 mm圓球(b)相位還原(c)三維表面輪廓(d)曲面圖[32] 8 圖 1 9 三維量測設備架構圖[5] 9 圖 1 10 計算後之最佳三條紋術: (a)25 (b)24 (c)20 (d)相位展開圖[5] 9 圖 1 11 相位移干涉術應用於顯微鏡系統架構圖[33] 10 圖 1 12 使用SVPI技術: (a)為一般條紋圖投影在物件上(b)影像還原後之圖像 (c)使用SVPI技術至曝光處(d)將曝光處影像還原後之圖像[33] 10 圖 1 13 錫球之表面高度: (a)三維表面量測結果(b)錫球高度剖面之曲線[33] 11 圖 1 14 三色條紋示意圖[43] 12 圖 1 15 RGB三通道擷取結果:(a)紅色通道 (b)綠色通道 (c)藍色通道[31] 13 圖 1 16 RGB三步相位移之數位條紋投影系統 13 圖 2 1 餘弦條紋的強度分布示意圖 16 圖 2 2 數位條紋投影架構圖 17 圖 2 3 七步相移條紋圖 20 圖 2 4 反正切函數之分子分母正負號求得2π模數示意圖 (a)象限判別圖 (b)π模數轉換2π模數[38] 21 圖 2 5 相位包裹及相位展開示意圖 21 圖 2 6 3D列印條紋之相位包裹圖 22 圖 2 7 條紋投影系統之光學幾何關係[39] 23 圖 2 8 參考平面扣除法流程 26 圖 2 9 M2螺紋及平坦面之三步相移量測實驗照片[45] 27 圖 2 10三步相移之相位展開圖:(a)M2螺絲量測(b)平坦面量測 27 圖 3 1指紋量測系統架構示意圖 28 圖 3 2指紋量測系統架構圖 28 圖 3 3 DLP投影機 29 圖 3 4 CCD相機 [45] 31 圖 3 5 透鏡之光路模擬 [45] 33 圖 3 6 80 mm雙凸、50 mm雙凹及80 mm平凸透鏡[45] 33 圖 3 7 透影條紋數目(a)縮小前(b)縮小後[45] 34 圖 3 8 臉部量測系統架構示意圖 34 圖 3 9臉部量測系統架構圖 35 圖 3 10 AT-200CL之CCD[43] 35 圖 3 11 多步相位移之影像處理程式介面 36 圖 3 12 指紋量測實驗步驟 38 圖 3 13 臉部量測實驗步驟 39 圖 4 1 紅黑週期0.73mm條紋實驗圖 40 圖 4 2紅黑週期0.73mm條紋解包裹後相位包裹圖 41 圖 4 3紅黑週期0.73mm條紋立體相位分布圖 41 圖 4 4紅黑週期0.73mm條紋相位還原圖 42 圖 4 5 紅黑週期0.73mm條紋絕對相位圖 43 圖 4 6 紅黑週期0.73mm條紋基準面絕對相位圖 43 圖 4 7紅黑週期0.73mm條紋實驗結果圖(a) 44 圖 4 8 紅黑週期0.73mm條紋實驗結果圖(b) 44 圖 4 9 紅黑週期0.73mm條紋剖面圖 45 圖 4 10紅黑週期1.3mm條紋實驗圖 46 圖 4 11紅黑週期1.3mm條紋解包裹後相位包裹圖 47 圖 4 12紅黑週期1.3mm條紋立體相位分布圖 47 圖 4 13紅黑週期1.3mm條紋相位還原圖 48 圖 4 14 紅黑週期1.3mm條紋絕對相位圖 49 圖 4 15 紅黑週期1.3mm條紋基準面絕對相位圖 49 圖 4 16紅黑週期1.3mm條紋實驗結果圖(a) 50 圖 4 17 紅黑週期1.3mm條紋實驗結果圖(b) 50 圖 4 18紅黑週期1.3mm條紋剖面圖 51 圖 4 19綠黑週期0.73mm條紋實驗圖 52 圖 4 20綠黑週期0.73mm條紋解包裹後相位包裹圖 53 圖 4 21綠黑週期0.73mm條紋立體相位分布圖 53 圖 4 22綠黑週期0.73mm條紋相位還原圖 54 圖 4 23 綠黑週期0.73mm條紋絕對相位圖 55 圖 4 24 綠黑週期0.73mm條紋基準面絕對相位圖 55 圖 4 25 綠黑週期0.73mm條紋部分剖面圖 56 圖 4 26綠黑週期0.73mm條紋實驗結果圖(a) 57 圖 4 27 綠黑週期0.73mm條紋實驗結果圖(b) 57 圖 4 28綠黑週期1.3mm條紋實驗圖 58 圖 4 29綠黑週期1.3mm條紋解包裹後相位包裹圖 59 圖 4 30綠黑週期1.3mm條紋立體相位分布圖 59 圖 4 31綠黑週期1.3mm條紋相位還原圖 60 圖 4 32 綠黑週期1.3mm條紋絕對相位圖 61 圖 4 33 綠黑週期1.3mm條紋基準面絕對相位圖 61 圖 4 34綠黑週期1.3mm條紋實驗結果圖(a) 62 圖 4 35綠黑週期1.3mm條紋實驗結果圖(b) 62 圖 4 36 綠黑週期1.3mm條紋部分剖面圖 63 圖 4 37藍黑週期0.73mm條紋實驗圖 64 圖 4 38藍黑週期0.73mm條紋解包裹後相位包裹圖 65 圖 4 39藍黑週期0.73mm條紋立體相位分布圖 65 圖 4 40藍黑週期0.73mm條紋相位還原圖 66 圖 4 41藍黑週期0.73mm條紋絕對相位圖 67 圖 4 42 藍黑週期0.73mm條紋基準面絕對相位圖 67 圖 4 43 藍黑週期0.73mm條紋部分剖面圖 68 圖 4 44藍黑週期0.73mm條紋實驗結果圖(a) 69 圖 4 45 藍黑週期0.73mm條紋實驗結果圖(b) 69 圖 4 46藍黑週期1.3mm條紋實驗圖 70 圖 4 47藍黑週期1.3mm條紋解包裹後相位包裹圖 71 圖 4 48 藍黑週期1.3mm條紋相位立體分布圖 71 圖 4 49 藍黑週期1.3mm條紋相位還原圖 72 圖 4 50 藍黑週期1.3mm條紋絕對相位圖 73 圖 4 51 藍黑週期1.3mm條紋基準面絕對相位圖 73 圖 4 52 藍黑週期1.3mm條紋部分剖面圖 74 圖 4 53藍黑週期1.3mm條紋實驗結果圖(a) 75 圖 4 54藍黑週期1.3mm條紋實驗結果圖(b) 75 圖 4 55黑白週期0.73mm條紋實驗圖 76 圖 4 56黑白週期0.73mm條紋解包裹後相位包裹圖 77 圖 4 57黑白週期0.73mm條紋立體相位分布圖 77 圖 4 58黑白週期0.73mm條紋相位還原圖 78 圖 4 59 黑白週期0.73mm條紋絕對相位圖 79 圖 4 60 黑白週期0.73mm條紋絕對相位圖 79 圖 4 61 黑白週期0.73mm條紋部分剖面圖 80 圖 4 62黑白週期0.73mm條紋實驗結果圖(a) 81 圖 4 63黑白週期0.73mm條紋實驗結果圖(b) 81 圖 4 64黑白週期1.3mm條紋實驗圖 82 圖 4 65黑白週期1.3mm條紋解包裹後相位包裹圖 83 圖 4 66黑白週期1.3mm條紋立體相位分布圖 83 圖 4 67黑白週期1.3mm條紋相位還原圖 84 圖 4 68 黑白週期1.3mm條紋絕對相位圖 85 圖 4 69 黑白週期1.3mm條紋基準面絕對相位圖 85 圖 4 70黑白週期1.3mm條紋部分剖面圖 86 圖 4 71黑白週期1.3mm條紋實驗結果圖(a) 87 圖 4 72黑白週期1.3mm條紋實驗結果圖(b) 87 圖 4 73指紋壓於玻璃,黑白週期0.73mm條紋實驗圖 88 圖 4 74指紋壓於玻璃,黑白週期0.73mm條紋解包裹後相位包裹圖 89 圖 4 75指紋壓於玻璃,黑白週期0.73mm條紋立體相位分布圖 89 圖 4 76指紋壓於玻璃,黑白週期0.73mm條紋相位還原圖 90 圖 4 77指紋壓於玻璃,黑白週期0.73mm條紋絕對相位圖 91 圖 4 78指紋壓於玻璃,黑白週期0.73mm條紋基準面絕對相位圖 91 圖 4 79指紋壓於玻璃,黑白週期0.73mm條紋部分剖面圖 92 圖 4 80指紋壓於玻璃,黑白週期0.73mm條紋實驗結果圖 93 圖 4 81指紋壓於玻璃,黑白週期1.3mm條紋實驗圖 94 圖 4 82指紋壓於玻璃,黑白週期1.3mm條紋解包裹後相位包裹圖 95 圖 4 83指紋壓於玻璃,黑白週期1.3mm條紋立體相位分布圖 95 圖 4 84指紋壓於玻璃,黑白週期1.3mm條紋相位還原圖 96 圖 4 85指紋壓於玻璃,黑白週期1.3mm條紋絕對相位圖 97 圖 4 86指紋壓於玻璃,黑白週期1.3mm條紋基準面絕對相位圖 97 圖 4 87指紋壓於玻璃,黑白週期1.3mm條紋部分剖面圖 98 圖 4 88指紋壓於玻璃,黑白週期1.3mm條紋實驗結果圖 99 圖 4 89 臉部量測實驗圖 100 圖 4 90臉部量測解包裹後相位包裹圖 101 圖 4 91臉部量測立體相位分布圖 101 圖 4 92臉部量測相位還原圖 102 圖 4 93臉部量測絕對相位圖 103 圖 4 94臉部量測基準面絕對相位圖 103 圖 4 95臉部量測剖面圖 104 圖 4 96臉部量測實驗結果圖與剖面圖做對比 104 表目錄 表 3 1 DLP投影機規格表 30 表 3 2 CCD相機規格表 32 |
參考文獻 |
[1]林詩瑀, 蔡裕祥, “精密量測及檢驗,” 全華科技圖書, 2002. [2]楊國輝, 黃宏彥, “雷射原理與量測概論,” 五南圖書, 2002. [3] B. Bidanda, S. Motavalli, and K. Harding, “Reverse engineering: an evaluation of prospective non-contact technologies and application in manufacturing system,” International Journal of Computer Integrated Manufacturing, Vol. 4, No. 3, pp. 145-156, 1991. [4] P.J. Besl, “Active optical range imaging sensors,” Machine Vision and Applications, Vol. 1, No. 2, pp. 127-152, 1988. [5]Z. Zhang, S. Huang, Y. Xu, C. Chen, Y. Zhao, N. Gao, and Y. Xiao, “3D palmprint and hand imaging system based on full-field composite color sinusoidal fringe projection technique,” Applied Optics, Vol. 52, No. 25, pp. 6138-6145, 2013. [6] S. Zhang, “Recent progresses on real-time 3D shape measurement using digital fringe projection techniques,” Optics and Lasers in Engineering, Vol. 48, No. 2, pp. 149-158, 2010. [7] S. Huang, Z. Zhang, Y. Zhao, J. Dai, C. Chen, Y. Xu, E. Zhang, and L. Xie, “3D fingerprint imaging system based on full-field fringe projection profilometry,” Optics and Lasers in Engineering, Vol. 52, pp. 123-130, 2014. [8] 蔡宇軒, “疊紋式晶圓翹曲量測技術之開發,” 國立臺灣科技大學機械工程系碩士論文, 2014. [9] J. Aizenberg, J. A. Rogers, K. E. Paul, and G. M. Whitesides, “Imaging profiles of light intensity in the near field: applications to phase-shift photolithography,” Applied Optics, Vol. 37, No. 11, pp. 2145-2152, 1998. [10] Y. Cheng, and J. C. Wyant, “Phase shifter calibration in phase-shifting interfe- rometry,” Applied Optics, Vol. 24, No.18, pp. 3049-3052, 1985. [11] P. Hariharan, B. F. Oreb, and T. Eiju, “Digital phase-shifting interferometry: a simple error-compensating phase calculation algorithm,” Applied Optics, Vol. 26, No. 13, pp. 2504-2505, 1987. [12] K. Creath, “Phase-shifting speckle interferometry,” Applied Optics, Vol. 24, No. 18, pp. 3053-3058, 1985. [13] A. Twitto, J. Shamir, A. Bekker, and A. Notea, “Detection of internal defects using phase shifting holographic interferometry,” NDT & E International, Vol. 29, No. 3, pp. 163-173, 1996. [14] G. Lai, and T. Yatagai, “Generalized phase-shifting interferometry,” Journal of the Optical Society of America A, Vol. 8, No. 5, pp. 822-827, 1991. [15] W. Chung, and L. Wen, “Measurement of warpage of electronic packagings after machining by phase-shifting shadow moire method,” Proceedings of SPIE 4537, Third International Conference on Experimental Mechanics, China, Vol. 4537, pp. 20-24, 2002. [16] H. Schreiber, and J. H. Bruning, “Phase shifting interferometry,” Optical Shop Testing, pp. 547-666, 2006. [17] Y. Xu,and C.Ai, “Simple and effective phase unwrapping technique,” Proceedings of SPIE 2003, Interferometry VI: Techniques and Analysis, San Diego, Vol. 2003, pp. 254-263, 1993. [18]J.A.Quiroga,A.Gonz’alez-Cano,and E. Bernabeu, ”Phase-unwrapping algorithm based on an adaptive criterion,” Applied Optics, Vol. 34, No. 14, pp. 2560-2563, 1995. [19] D. C. Ghiglia, G. A. Mastin, and L. A. Romero, “Cellular-automata method for phase unwrapping,” Journal of the Optical Society of America A, Vol. 4, pp. 267-280, 1987. [20] D. C. Ghiglia, and M. D. Pritt, “Two-dimensional phase unwrapping: Theory, algorithms and software,” Wiley-Interscience, 1998. [21] R. M. Goldstein, H. A. Zebker, and C. L. Werner, “Satellite radar interferometry : two-dimensional phase unwrapping,” Radio Science, Vol. 23, No. 4, pp. 713-720, 1988. [22] D. J. Bone, “Fourier fringe analysis: the Two-dimensional phase unwrapping problem,” Applied Optics, Vol. 30, No. 25, pp. 3627-3632, 1991. [23] K.G. Larkin, and B.F. Oreb, “Design and assessment of symmetrical phase-shifting algorithms,” Journal of the Optical Society of America A, Vol. 9, No.10 , pp. 1740-1748, 1992. [24] J. Schwider, R. Burow, K.-E. Elssner, J. Grzanna, R. Spolaczyk, and K. Merkel, “Digital wave-front measuring interferometry: some systematic error sources,” Applied Optics, Vol. 22, No. 21, pp. 3421-3432, 1983. [25] P. Carré,“Installation et utilisation du comparateur photoelectrique et interferentiel du Bureau International des Poids et Mesures,” Metrologia, Vol. 2, No. 1, pp. 13-23, 1966. [26] J. E. Gallagher, and D. R. Herriott, “Wavefront measurement,” U. S. Patent No. 3, 694, 088, 1972. [27]P.Hariharan,B.F.Oreb,and T. Eiju, “Digital phase-shift interferometry: a simple error-compensating phase calculation algorithm,” Applied Optics, Vol. 26, No. 13 , pp. 2504-2506, 1987. [28]Y. Surrel, “Phase stepping: a new self-calibrating algorithm,” Applied Optics, Vol. 32, No. 19, pp. 3598-3600, 1993. [29]A.apanni,L.Pezzati,D.Bertani,M.Cetica,andF.Francini, “Phase-shifting speckle interferometry: a noise reduction filter for phase unwrapping,” Optical Engineering, Vol. 36, No. 9, pp. 2466-2472, 1997. [30] P. S. Huang, F. Jin, and F. P. Chiang, “Quantitative evaluation of corrosion by a digital fringe projection technique,” Optics and Lasers in Engineering, Vol. 31, No. 5, pp. 371-380, 1999. [31] P. S. Huang, C. Zhang, and F. P. Chiang, “High-speed 3-D shape measurement based on digital fringe projection,” Optical Engineering, Vol. 42, No. 1, pp. 163-168, 2003 [32] C. Quan, X. Y. He, C. F. Wang, C. J. Tay, and H. M. Shang, “Shape measurement of small objects using LCD fringe projection with phase shifting,” Optics Communications, Vol. 189, No. 1-3, pp. 21-29, 2001. [33] L. C. Chen and C. C. Liao, “Calibration of 3D surface profilometry using digital fringe projection,” Meas. Sci. Technol., vol. 16, no. 8, pp. 1554–1566, 2005. [34] G. Babaie, M. Abolbashari, and F. Farahi, “Dynamics range enhancement in digital fringe projection technique,” Precision Engineering, Vol. 39, pp. 243-251, 2015. [35] M. Takeda, H. Ina, and S. Kobayashi, “Fourier-transform method of fringe pattern analysis for computer-based topography and interferometry," Journal of the Optical Society of America, Vol. 72, No. 1, pp. 156-160, 1982. [36] K. J. Gåsvik, “Optical metrology,” John Wiley & Sons, 2003. [37] D. Malacara, “Optical shop testing,” John Wiley & Sons, 2007. [38] W. W. Macy, “Two-dimensional fringe-pattern analysis,” Applied Optics, Vol. 22, No. 23, pp. 3898-3901, 1983. [39] P. Sandoz, “An algorithm for profilometry by white-light phase-shifting interferometry,” Journal of Modern Optics, Vol. 43, No. 8, pp. 1545-1554, 1996. [40] 高斌栩, “創新式平行性相位還原法應用於剪切平面之研究,” 國立中興大學機械工程研究所碩士論文, 2005. [41] 陳昭元, “正弦及三角條紋結構光投影法的三維量測分析,” 國立中央大學資訊工程學系研究所論文, 2009. [42] 陳怡光, “表面電漿共振移相干涉儀之影像處理系統,” 國立中央大學機械工程研究所碩士論文, 2003. [43] 顏子評, “多步相位移干涉術應用於三維複雜曲面量測, 淡江大學機械與機電工程學系碩士班學位論文, 2015 [44] 陳建文, “數位相移條紋投影術應用於三維微米表面輪廓量測,” 淡江大學機械與機電工程學系碩士班學位論文, 2016 |
論文全文使用權限 |
如有問題,歡迎洽詢!
圖書館數位資訊組 (02)2621-5656 轉 2487 或 來信