系統識別號 | U0002-0604201514554600 |
---|---|
DOI | 10.6846/TKU.2015.00165 |
論文名稱(中文) | 太陽能薄膜蒸餾與傳統逆滲透海水淡化系統生命週期評估之比較 |
論文名稱(英文) | A study on the comparison of life cycle assessment of seawater desalination technology with solar membrane distillation and conventional RO process |
第三語言論文名稱 | |
校院名稱 | 淡江大學 |
系所名稱(中文) | 水資源及環境工程學系碩士班 |
系所名稱(英文) | Department of Water Resources and Environmental Engineering |
外國學位學校名稱 | |
外國學位學院名稱 | |
外國學位研究所名稱 | |
學年度 | 103 |
學期 | 1 |
出版年 | 104 |
研究生(中文) | 唐晟哲 |
研究生(英文) | Chen-Jhe Tang |
學號 | 601480634 |
學位類別 | 碩士 |
語言別 | 繁體中文 |
第二語言別 | |
口試日期 | 2015-01-26 |
論文頁數 | 118頁 |
口試委員 |
指導教授
-
高思懷(shgau@mail.tku.edu.tw)
委員 - 李育明(yml@mail.ntpu.edu.tw) 委員 - 胡憲倫(allenhu@ntut.edu.tw) |
關鍵字(中) |
太陽能 生命週期評估 史特靈引擎 |
關鍵字(英) |
Solar energy desaination system Gabi life cycle assessment(LCA) |
第三語言關鍵字 | |
學科別分類 | |
中文摘要 |
隨著民眾環保意識抬頭,企業紛紛開始追求永續發展。永續發展定義為「人類的發展能夠滿足當代的需求,且不致危及到子孫滿足其需要的能力」,而談永續發展,須對產品的整個生命週期對於環境的衝擊,作全盤考量。 本研究對太陽能薄膜蒸餾海水淡化廠做生命週期評估,分析在建造階段原料之使用與淡化過程對環境的衝擊,並找出各單元中對環境負擔較大者,提供研發團隊修正之參考。 本研究使用生命週期評估軟體GaBi 6 來計算Eco-indicator 99的衝擊指標,模擬全太陽能薄膜蒸餾海水淡化系統(SE)、傳統逆滲透海水淡化系統(RO)以及混和能源薄膜蒸餾海水淡化系統(HE系統)三種情境,以生產100m3/day之淡水為功能單位,評估建廠階段所需原料與營運階段所造成的環境衝擊。 結果顯示在建廠階段使用原料方面三種系統衝擊大小順序為SE系統最大、HE系統次之而RO系統最小,主要原因為海水轉換效率,SE與HE系統為10%,而RO系統為30%,因此SE與HE系統所需設備及廠房皆較RO系統為大,且SE與HE系統所需使用之太陽能史特靈碟型盤需要極大的土地面積。在營運階段方面以RO系統衝擊最高、HE系統次之、SE系統最小,主要原因為能源使用,台灣目前電力來源以燃煤發電為主,由於開採煤礦在化石燃料因子的衝擊有顯著影響,發電過程排放硫、氮等氧化物,導致可吸入無機物增加。 太陽能碟型盤使用原鋁製作,整體衝擊以SE系統最大、HE系統次之、而RO系統最小,其原因為RO系統在營運階段之衝擊雖遠大於SE、與HE系統兩廠,但SE系統與HE系統在建廠階段碟型盤引擎與廠房大小以及桶槽需求量使用原料皆大於RO系統(約3倍),導致SE與HE兩系統整體衝擊大增,其中以可吸入性無機物、化石燃料以及氣候變遷最為明顯。 如使用回收鋁製作碟型盤,SE系統與HE系統之衝擊將大幅下降,在整體衝擊上RO系統衝擊最高為、HE系統次之,SE系統最低,主要原因為RO系統整廠能源來自台電所提供之電力,造成人體健康衝擊項目極大所導致。 關鍵字:太陽能、海水淡化系統、Gabi、生命週期評估 |
英文摘要 |
Owing to the rising awareness of environmental protection, sustainable development is being required and meets the needs of enterprises. Sustainable development is the development that meets the needs of the present without compromising the ability of future generations to meet their own needs. All impacts to environment should be considered comprehensively into the life cycle assessment of one product. The aims of this study: (1) evaluate the life cycle assessment of thin film solar distillation desalination plant, (2) explore the environmental impacts of raw material use during the construction procedure and the impacts to desalination process, and (3) provide more useful environmental loading analyses to further studies. The software, GaBi6, was used to calculate the impacts of Eco- indicator 99. GaBi6 provided modules to model these three cases: whole solar thin film distillation desalination systems (SE), reverse osmosis desalination systems (RO), and thin film distillation desalination systems mixing energy (HE). Each of cases was hypothesized that 100 m3 of fresh water produced per day to evaluate impacts on construction procedure and operating procedure. The results showed the impacts in orders on entire construction procedure were following: SE > RO > HE, which reflected the differences of seawater transfer efficiencies. The transfer efficiencies of SE and HE were the same as 10%, while that of RO was 30%. In other words, larger instruments, plants, and land-use were required in SE and HE rather to RO. On the operating procedure, the impacts in orders were RO > HE > SE, owing to the “energy use”. In Taiwan, most generations of electric powers were by coal-fired. As a result, fossil fuels increased the emission of sulfur and nitrogen oxides, and raised the risk of inorganic substance-intake. Besides, solar disks were manufactured by Aluminum, so the total environmental impacts were in sequence of SE > HE > RO. In the case of operating procedure, the impacts of RO were far more than these of SE, or HE. In the case of construction procedure, the solar disks, plant-size, and tankages of SE, or HE were about three times than these of RO. The contributions of inorganic respiratory, fossil fuels, and climate change were the most significant impact items to environment. Once the Recycling aluminum applied in the solar disks of SE or HE, total impacts decreased significantly. The total environmental impacts were in sequence of RO > HE > SE. The risks of human health were raising by means of the electric power produced . |
第三語言摘要 | |
論文目次 |
目錄 圖目錄 III 表目錄 VI 第一章 緒論 1 1.1緣起 1 1.2目的及內容 3 第二章 文獻回顧 4 2.1 水資源現況 4 2.2薄膜蒸餾技術 4 2.2-1 薄膜蒸餾技術介紹 4 2.2-2薄膜蒸餾的特徵與優點: 7 2.3太陽能現況 8 2.4史特靈引擎介紹 12 2.5生命週期評估 16 2.5-1生命週期評估介紹 16 2.5-2生命週期評估模式與軟體應用 20 2-5-3 生命週期評估之相關研究 26 第三章 研究方法與流程 27 3.1生命週期盤查資料及假設 27 3.2 研究方法與流程設計 30 3.2-1參考系統特性 30 3.2-2模擬情境條件 31 第四章結果與討論 49 4.1盤查分析 49 4.1-1三系統建廠階段原料使用特徵化與標準化 49 4.1-2三系統建廠階段原料使用權重化 61 4.1-3三系統營運階段特徵化、標準化 68 4.1-4三系統藥物影響 77 4.1-5三系統營運階段權重化 83 4.2 三系統衝擊評估 89 4.2-1建廠階段原料使用評估 89 4.2-2營運階段評估 96 4.2-3三系統整體評估 102 4.3成本分析 109 4.3-1 建廠階段原料使用土地成本分析 109 4.3-2電力成本 109 4.3-3單位產水成本 111 4.3-4討論 113 第五章結論與建議 114 參考文獻 116 圖目錄 圖2.1薄膜蒸餾原理 5 圖2.2直接接觸薄膜蒸餾法 6 圖2.3空氣間隙薄膜蒸餾法 6 圖2.4氣體掃掠薄膜蒸餾法 7 圖2.5真空薄膜蒸餾法 7 圖2.6平板式集熱器構造圖 9 圖2.7真空管集熱器原理 9 圖2.8聚焦式集熱器原理 10 圖2.9熱儲存槽內含熱交換器 10 圖2.10熱儲存槽內不含熱交換器 11 圖2.11熱儲存槽內含分隔板 11 圖2.12史特靈引擎運作流程 12 圖2.13 α型史特靈引擎 13 圖2.14 β型史特靈引擎 13 圖2.15 γ型史特靈引擎 13 圖2.16史特靈引擎運用光線示意圖 14 圖2.17史特靈引擎模組 15 圖2.18生命週期評估衝擊 17 圖2.19生命週期評估基礎架構 18 圖2.20 Eco-Indicator 99 衝擊性評估模式之流程 21 圖3.1研究範圍 27 圖3.2 SE系統系統界限 28 圖3.3 RO系統系統界限 29 圖3.4HE系統系統界限 29 圖3.5全太陽能海水淡化系統 32 圖3.6RO海水淡化系統 32 圖3.7混和能源驅動薄膜海水淡化系統 33 圖3.8前處理架構圖 35 圖3.9SE海水淡化系統架構圖 36 圖3.10RO海水淡化系統架構圖 37 圖3.11末端處理架構圖 38 圖4.1 SE系統對環境衝擊 78 圖4.2三系統總衝擊權重化比較 84 圖4.3三系統前處理權重化比較 85 圖4.4三系統淡化處理權重化比較 87 圖4.5三系統末端處理權重化比較 88 圖4.6三系統特徵化衝擊百分比 89 圖4.7 三系統標準化衝擊百分比 90 圖4.8 SE系統與HE系統建廠階段原料使用衝擊權重化比例圖 90 圖4.9 RO系統建廠階段原料使用衝擊權重化比例圖 91 圖4.10 三系統廠房建造特徵化之衝擊比例圖 92 圖4.11 三系統廠房建造標準化之衝擊比例圖 93 圖4.12三系統廠房設備建造特徵化之衝擊比例圖 94 圖4.13三系統建廠階段原料使用權重化衝擊比較 95 圖4.14 RO系統特徵衝擊百分比 96 圖4.15 RO系統標準化衝擊百分比 97 圖4.16 HE系統特徵衝擊百分比 97 圖4.17 HE系統標準化衝擊百分比 98 圖4.18 SE系統特徵衝擊百分比 99 圖4.19 SE系統標準化衝擊百分比 99 圖4.20三系統總衝擊權重化比較 100 圖4.21三系統前處理權重化比較 101 圖4.22 RO與HE兩系統電力成本趨勢 111 圖4.23三系統產水成本預估圖 112 表目錄 表2.1損害種類及原因 22 表2.2 Eco-Indicator 99 衝擊類別 23 表2.3 Eco-Indicator 99 損害評估之轉換因子 24 表2.4 Eco-Indicator 99 損害評估之常態因子 24 表2.5權重化轉換因子表 25 表3.1各系統建築物假設 39 表3.2桶槽參數資料 40 表3.3三系統各單元所需機台 41 表3.4三系統前處理水量表 42 表3.5三系統前處理機械設備耗能參數表 43 表3.6三系統前處理投藥量參數表 44 表3.7三系統海水淡化程序水量參數表 45 表3.8三系統海水淡化程序機械耗能參數表 46 表3.9三系統海水淡化程序藥品用量參數表 46 表3.10三系統末端處理水量參數差異表 47 表3.11三系統末端處理機械耗能參數差異表 48 表4.1 SE&HE系統建廠階段原料使用特徵化衝擊 50 表4.2 SE&HE系統建廠階段原料使用標準化衝擊 51 表4.3 RO系統建廠原料階特徵化衝擊 53 表4.4 RO系統建廠階段原料使用標準化衝擊 54 表4.5 SE&HE系統設備特徵化衝擊 55 表4.6 SE&HE系統設備標準化衝擊 56 表4.7 RO系統設備特徵化衝擊 57 表4.8 RO系統機台標準化衝擊 58 表4.9 SE與HE太陽能史特靈碟形特徵化衝擊 59 表4.10 SE&HE系統太陽能史特靈碟形盤衝擊標準化比較 60 表4.11 SE&HE系統建築物衝擊權重化 61 表4.12 RO系統建築物衝擊權重化 62 表4.13 SE&HE系統設備原料衝擊權重化 64 表4.14 RO衝擊權重化 66 表4.15 SE&HE系統太陽能史特靈碟形盤衝擊權重 67 表4.16 RO各流程衝擊特徵化 69 表4.17 RO系統各流程衝擊標準化 70 表4.18 HE各流程衝擊特徵化 72 表4.19 HE各流程衝擊標準化 73 表4.20 SE各流程衝擊特徵化 75 表4.21 SE 各流程衝擊標準化 76 表4.22 SE系統對環境衝擊 77 表4.23不使用次氯酸鈣的情況下SE系統所造成的衝擊 79 表4.24不使用鹽酸的情況下SE系統所造成的衝擊 80 表4.25不使用氫氧化鈉的情況下SE系統所造成的衝擊 81 表4.26各項藥物衝擊影響 82 表4.27三系統總衝擊權重化比較 83 表4.28三系統前處理權重化比較 85 表4.29三系統淡化處理權重化比較 86 表4.30末端處理權重化比較 88 表4.31三系統衝擊權重化比較 103 表4.32太陽能史特靈碟形盤之原料衝擊特徵化 104 表4.33太陽能史特靈碟形盤之原料衝擊標準化 105 表4.34 SE系統太陽能史特靈碟形盤之原料衝擊權重化 106 表4.35三系統各階段衝擊權重化整理 107 表4.36太陽能史特靈碟形盤之原料為回收鋁的情況下三系統衝擊權重化比較 108 表4.37台灣歷年電價 110 表4.38台灣三系統電價評估 110 表4.39台灣近年消費者物價指數 112 |
參考文獻 |
南竿三期海淡廠BTO案之興建及營運綜合研析 Al-Karaghouli, A., Renne, D., & Kazmerski, L. L. 2010. Technical and economic assessment of photovoltaic-driven desalination systems. Renewable Energy, 35(2): 323-328. Banat, F. A. S., J. 1998. Desalination by membrane distillation:a prametric study. Ben Bacha, H., Dammak, T., Ben Abdalah, A. A., Maalej, A. Y., & Ben Dhia, H. 2007. Desalination unit coupled with solar collectors and a storage tank: modelling and simulation. Desalination, 206(1-3): 341-352. Bouchekima, Gros, Ouahes, & Diboun. 1998. Performance study of the capillary film solar distiller. Bouchekimaa*, B., Grosb, B., Ouahesc, R., & Dibouna, M. 2001. The performance of the capillary film solar still installed. Bravo, Y., Carvalho, M., Serra, L. M., Monne, C., Alonso, S., Moreno, F., & Munoz, M. 2012. Environmental evaluation of dish-Stirling technology for power generation. Solar Energy, 86(9): 2811-2825. Compain, P. 2012. Solar Energy for Water Desalination. Procedia Engineering, 46: 220-227. Council, W. W. 2000. World Water Vision. Elimelech, M., & Phillip, W. A. 2011. The Future of Seawater Desalination: Energy, Technology, and the Environment. Goosen, M. F. A., Sablani, S. S., Walid H. Shayya b, C. P., & A1-Hinai, H. 2000. Thermodynamic and economic considerations in solar desalination Jijakli, K., Arafat, H., Kennedy, S., Mande, P., & Theeyattuparampil, V. V. 2012. How green solar desalination really is? Environmental assessment using life-cycle analysis (LCA) approach. Desalination, 287: 123-131. Kalogirou, S. 2005. Seawater desalination using renewable energy sources. Progress in Energy and Combustion Science, 31(3): 242-281. Lawson, K. W., &Lloyd, D.R. 1996 b. Membrane distillation.II.Direct contact contact MD. Lawson, K. W., &Lloyd, D.R. 1996a. Membrane distillation.I.Module design and perormance evaluation ustng vacuum membrane distillation. Lawson, K. W., &Lloyd, D.R. 1997. Membrane distillation. Lloyd, D. R., & Lawson, K. W. 1997. Review Membrane distillation. J. Membrane Sci., : p1~25. Messina, V. D. S.-C. P. S. P.-. 2006. A Life Cycle Assessment (LCA) of a Paraboloidal-Dish Solar Thermal Power Generation System. Parekh, S., Faridb, M., Selman, J. R., & l-Hallaj, a. 2004. Solar desalination with a humidification-dehumidification technique - a comprehensive technical review. PRe, C. 2001. Sima Pro Database Manual Methods library. Qiblawey, H. M., & Banat, F. 2008. Solar thermal desalination technologies. Desalination, 220(1-3): 633-644. Qtaishat, M. R., & Banat, F. 2013. Desalination by solar powered membrane distillation systems. Desalination, 308: 186-197. Raluy, G., Serra, L., & Uche, J. 2006. Life cycle assessment of MSF, MED and RO desalination technologies. Energy, 31(13): 2361-2372. Raluy, R. G., Serra, L., & Uche, J. 2005. Life cycle assessment of desalination technologies integrated with renewable energies. Desalination, 183(1-3): 81-93. Romero, M. 2010. Director Plataforma Solar Almerı’a-CIEMAT. Smolders, K., &Franken,A. 1989. Terminologly for membrane distillation Tiwari, G. 2002. solar energy:fundamentals , design modeling and applicatination. Tiwari, G., & Ghosal, M. 2005. Renewable energy resources: basic principles and applications. Tsoutsos, T., Frantzeskaki, N., & Gekas, V. 2005. Environmental impacts from the solar energy technologies. Energy Policy, 33(3): 289-296. Viebahn, P., Lechon, Y., & Trieb, F. 2011. The potential role of concentrated solar power (CSP) in Africa and Europe—A dynamic assessment of technology development, cost development and life cycle inventories until 2050. Energy Policy, 39(8): 4420-4430. 王志源. 2004. 市售行動電話生命週期評估之個案研究. 國立屏東科技大學環境工程與科學系. 胡湘玲. 2009. 太陽能源. 天下文化. 周藹慶. 2011/6/15 2011下半年太陽能產業展望. 拓墣產業研究所. 曾玉泉. 2006. 極速引擎的魅力 –史特靈引擎(Stirling Engine)的介紹、製作與教學活動設計. 生活科技教育月刊 三十九卷 第五期. 張智淵. 2006. 生質能之生命週期評估-以甘蔗提煉燃料酒精為例. 國立臺北大學自然資源與環境管理研究所. 張韋豪. 2011. 台灣半導體產業環境管理與碳足跡現況及生命週期評估軟體需求探討. 台北科技大學. 陳茂景. 2009. 循環經濟型綠電廠技術發展. 中供高雄會刊, 17卷. 陳陵援, 陳. 鄧. 陳. 2004. 太陽光電設備產業發展分析. 台灣環境資源永續發展協會. 陳怡靜. 2009. 氫能社會之複合生命週期評估. 國立成功大學環境工程學系碩博士班. 陳羿韶、鄭仲傑. 2011. 史特靈引擎加裝磁鐵發電實驗. 淡江大學 機械與機電工程學系. 李育儒. 2009. 塗佈卡紙之生命週期評估. 國立台北大學自然資源與環境管理研究所. 李佳禾. 2004. 生命週期評估與環境績效分析研究-以人造纖維產品為例. 國立成功大學碩士班. 林洋玟. 2013. 廢玻璃與垃圾焚化飛灰資源化作為調濕陶瓷原料之生命週期評估. 淡江大學水資源與環境工程學系. 林曉洪, 陳姿蓉, & 洪國榮. 2008. 木基地板生產程序之生命週期評估. 2008台灣環境資源永續發展研討會. 游晉懿. 2012. 太陽能驅動薄膜蒸餾海水淡化系統之生命週期評估. 淡江大學水資源與環境工程學系. 莊憲洲. 2010. 12 吋 DRAM 廠耗能分析及能源消耗對全球暖化影響之研究. 臺北科技大學能源與冷凍空調工程系碩士. 蔡玫宜. 2009. 生命週期評估應用於第III類環境品宣告之研究-以行動電話為例. 朝陽科技大學環境工程與管理系. 邱宏茂. 2003. 在薄膜海淡系統中前處理對薄膜結垢的影響. 國立成功大學機械工程學系碩博士班. 邱思瑀. 2011. 以生命週期衝擊評估作為環境影響評估之分析工具及其不確定性分析. 明志科技大學環境與資源工程研究所. 邱柏翔、張芷瑀、李彥德. 簡易γ型史特靈引擎製作. 淡江大學機械與機電工程學系. 邱昰芳. 2009/10/22. 2010年太陽光電製造業產業分析. 台灣經濟研究院產經資料庫. 吳以健.盧虎生. 2010. 稻米生產之生命週期與碳足跡環境影響評估. 農政與農情 212期. 黃瓊儀. 2003. 人造纖維產品之生命週期評估研究. 國立成功大學環境工程學系. |
論文全文使用權限 |
如有問題,歡迎洽詢!
圖書館數位資訊組 (02)2621-5656 轉 2487 或 來信